Journal - Articles: 'Total production cost optimization' - Grafiati (2024)

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Apache has developed a number of small oil fields with the help of unmanned minimal facility platforms near Varanus Island on the northwestern plank in West -Australia..Production monitoring and good allocation Use multiple phase drum meters on each platform.The performance is satisfactory, which led to a further unity being implemented in the deer field, where production is influenced by high gas pies, slugging and sand production.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The aim - the aim of this article is to present a practical model to determine the financial replacement time (ERT) of production machines.associated with the downtime of the machine.Analysis is performed to estimate drilling platforms.Cost.The study also finds, the study also finds superfluous costs too increasing time has a negative effect on ERT, while the purchase of other costs has a positive effect.Trgression analysis shows a linear connection between cost factors and ERT.Practical implications - The proposed approach can be used by the decision maker to determine the ERT of production machines used in the mining sector. Originality/value - the research that is suggested in this article, provides and develops an optimization model for the ERT of miners.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The choice of the right inspection intervals is a serious challenge for industries that use physical assets.In short, an interval increases operating costs and waste production, while a too long interval increases the chance of unexpected active errors.A technique that makes the qualitative evaluation of the functions of the assets possible to predict critical error conditions and the resulting consequences for determining suitable maintenance tasks for the assets.Taking into account fiasco reasons, inspection time and change to determine the inspection -S inspection -S inspection -S inspection -S inspection -inspection.Subsystems of the wind turbine are determined to minimize the total life cycle costs.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The water production in the early life of the recovery of the coal singing (CSG) makes these reservoirs other than conventional gas reservoirs.Fill from wells at optimum locations to reduce water production and to increase gas extraction to optimize filling places in a CSG reservoir, an integrated frame is developed to connect the reservoir current simulator (ECLIPSE) and the genetic algorithm (GA) optimization toolbox (Matlab).Tiffany unit in the San Juan -basin, the costs of the gas price and water treatment are varied.The gas price is less than $ 2/ MSCF, the filling plan, regardless of the costs of water treatment, is not financial and the drilling of extra wells cannot be financially justified.Up to $ 4/Stb, sharing the optimization framework intelligently the filling wells over the reservoir in a way in which the total water production of filling pits is reduced by 26%.The production is achieved by placing the filling wells in released parts of the coal bed, close to the existing wells.And the reservoir pressure is high.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Production systems must be supported by the availability of materials, a streamlined production process and a prepared production line to achieve the production objective.Repairing the relegation machine will be higher due to deadly failure.This article discusses two deep analyzes: accurate prediction of the collapse of binding machines based on the average time between errors (MTBF) using a in -depth learning data analytical technology and optimization of the total costs of the available capacity time.Display that the proposed deep -square data analysis can increase the accuracy of the MTBF prediction prediction to 66.12% and reduce the total maintenance costs by a maximum of 4% compared to the original model.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Material requirement planning (MRP) plays an important role in the lifetime of production companies because it has a major impact on the effectiveness of production activities and it influences total costs.To improve the improvement of the cost -effectiveness of the inventory.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Hydrogen offers an attractive opportunity to disconnect the current energy system.System optimization model to maximize the investment and operational synergy in electricity, heating and transport sectors, taking into account the integration of a hydrogen system to minimize the total costs.Carbon shelter and storage (storage (CCS) and (ii) Effect -to -gas (P2G). The proposed model was used in a future UK (GB) system. A comparison with the system without hydrogen showed that thatThe results of the G2G process can also reduce the results of the two hydrogen production processes of other energy sectors.Can promote the integration of wind energy from 83 GW to 130 GW during 30 MT carbon dimensions.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Dealing with heat stress and metabolic costs is crucial to prevent work -related disorders.In this document we have integrated remaining time formulations for heat tax and metabolic costs to develop a new party-size model to prevent heat coil and work-related musculoskeletal disorders.The total costs of the production provision process were investigated.Material handling transactions between the raw material and the production line was used for electric pallet jacket (EPJ).were obtained using the heating tribe and resting time compared to the total costs of this part of the delivery process of the production line with ISO 7243 Maximum metabolic work limit.Model optimization with multiple goals and complex limitations on metabolic costs and heat voltage.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Purpose The paper wants to use aluminum alloy to replace steel as the most important material in ultra-precision Hydro-Static bearing system for an ultra-hub-closing production system for plastic electronics to lower production costs than the costs of making stainless steel.Measurements were carried out after the lower was made.Due to the time limit, various rotation speed tests must be performed in the future.runs like an economic post -processing process.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

A MicroNetwork system is designed using wind/diesel generators electricity sources.Software that performs hybrid optimization model for electric renewable energy sources.The most suitable system architecture was selected from the optimization result based on the selected selection factors (initial investment costs, total electrical production and primary demand ratio, etc.).Generators of 400 kW and 300 kW have been selected based on the selection criteria.From around $ 11,000,000.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Intensive grain breeding results in various unintended consequences for the environment, including water pollution.Scenarios for intensive grain farms in Eastern Eastern.Tool.exceeded it due to the current counseling scenario (≤5%), mixed mixed effects on the costs ranging from a saving of £ 34.8/ha/year to an increase of £ 19, 0/ha/year in connection with the current best management costs.The current Advies scenario generated comparable cost savings between £ 30.4/ha/year and £ 73.40/ha/year.The scenario contributes sufficiently to unintended consequences and points to the need for structural change in national coverings.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

This article dissolves the problem of at the same time minimizing the total costs of the end product produced by systems that use a JIT approach.Reduction.datum.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

This article is about the problem of managing the profit that occurs during the seasonal production of pellets, which will be sold during the period of increased demand.Production.Minimum cost tree with shortest paths.New warehouse is presented near the city of Piangi.Increase the costs estimated in the case of the selection of other locations.Cost increases then a single point.From Voivodship and incorrectly assumed storage location, the transport costs can increase by a maximum of 75%.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

This article is about the problem of managing the profit that occurs during the seasonal production of pellets, which will be sold during the period of increased demand.Production.Minimum cost tree with shortest paths.New warehouse is presented near the city of Piangi.Increase the costs estimated in the case of the selection of other locations.Cost increases then a single point.From Voivodship and incorrectly assumed storage location, the transport costs can increase by a maximum of 75%.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The latest challenges in the Australia oil and gas market have exerted increased pressure on the CSG industry of Australia to roll incoming project costs.Behind the extraction of financial resources aimed at delivering an increased project value.In recent years, a step -by -step change has been made to optimize the technical design model, whereby extensive draft level design, feed -free design and partially automated detailed design are carried out collection system projects that are now being assumed.Will make an increased income possible for a project. The energy basis of the unit.The optimization measures investigated in this article are the most crucial for reservoir locations with a low drainage area per day. Where reserve routering is maximized by refining the configuration of the infrastructure above ground.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Unconventional gas sources, defined as sandstone with low permeability, coal seam and of course broken shale -gas reservoirs, form a huge potential resource for future natural gas supply in Australia and the world make the economy attractive.Critical about the success of the project. Almost all unconventional gas sources must be stimulated as economic;Used to analyze the process and the results often simplified;are important to be important to tackle the technical problems involved in unconventional reservoirs.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Critical study of power properties of materials needed in technical practice to guarantee an improved lifespan.Chemical failure, erosive failure, abrasive failure and fatigue error.was carried out to use the Hammermølen for 12 months with a production of 20 bags per hour. Day for 8 hours is expected to be 160 bags at a certain speed.Failure was between 1 to 2 hours a day., fatigue, impact and chemical wear., Design and suitable operational parameters.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Use of Rhodobium Marinumbacteria as a drug for hydrogen Bioproduction with optional fermentation state needs two steps in cultivation, ie. PRE-culture and hydrogen production periods with various media.Two staircases is an important production state for hydrogen gas .Asia (ammonium, succine and yeast extract) is usually used as a standard medium in the production of biohydrogen, and usually the component is analytical quality of chemicals.Assed when shaking 120 rpm for nine days.One ANOVA was a statistically significant difference between the average number and the condition, and it was found that P7 was considerably different with the other combination media, except P7 was insignificant with P3..ASY -The average price is about USD 677, and the prices for substitution media varied from USD 4.24 to USD 613.47.IDRIDAL TIME, the additional study of optimization cultivation mode is necessary.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The competing environment in the global markets has forced many manufacturers to choose the most suitable logistics to optimize the total logistics costs, time and warehouse.the genetic algorithms (gas) and the Fuzzy Logic techniques are used to optimize a new mathematical model of the logistics network.(EPQ) and the use of the gas and the unclear logical solution with probability parameters and various dimensions to validate the model studied in real situations, and we compared the output to demonstrate the performance of the two optimization techniques.was the optimized value of the logistics costs and the volume of the logistics network obtained.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The aim of this article is to develop an EPQ strategy (EPQ) of the Economic Production (EPQ) under the gray environment and space limitation.Presented warehouse model with other studies with crispy or fuzzy environments.After the Multi -Momn EPQ inventory model.The EPQ inventory model.vestments The results are compared with the analysis using crispy and fuzzy data.and bike time and costs;Gray data perform better in all scaling problems than fuzzy data.originality/valuable contribution of this study is the use of gray data to develop the EPQ inventory model with space restriction.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Apart from storage costs that are used as the only stock performance measure at the University of Ibadan Bakery, have a number of other criteria such as stock costs, service level, inventory turnover and delivery time on the service of a warehouse that has surfaced over the years, there isThe need to fully investigate all these criteria lenses.was taken over to find the best compromise between achieving the four goals by minimizing the sum of the deviation from the target values ​​for the goals.The target programming algorithm showed four goals (combined for an objective function).Storage costs for raw materials and available management time for duration on annoying days (<24 hours) for each material, the Torah 1.0 gave a uniform service level of 100%, a turnover ratio larger than 1 (> 1) for all materials with all materials with an insignificantIncrease (of <0.0001%) in the total stock costs of the raw materials and available joint time of zero days (<24 hours) for each material..

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Abstract Power System experiences an increasing part of the sustainable and intermittent energy production and rising electrification.Shared battery storage systems (S -BESS) can tackle these problems for commercial buildings with relatively high power tops.With a recurring horizon control algorithm.The results show that the total system costs were reduced by 19.2% compared to nothing battery.of value for DSO.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Quality costs analysis is considered a very important instrument that is used in the quality economy.-Compliance with selected company in the years 2004-2009 was the most important target of this study.The completed studies, the following ultimate ultimate were the final ultimate conclusions: - Quality costs in the company investigated showed an increasing trend in the years 2004-2007, and from 2008 a falling trend was observed (in 2009 they fell with 17% as oneTotal of 2008) showed - the ratio of losses from the total defective production was a falling trend in the years 2004-2006;Increase the costs of activities with regard to poor quality prevention, the costs of defective products and the total quality costs fall.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Since the concept of "Industry 4.0" was introduced, the most competitive industrial manufacturers in the world have tried to ensure sustainable technological development of high quality at low costs. In addition to the total automation of production and manufacturing, new manufacturing technologies will need to emerge to replace traditional production lines with more flexible production lines that can support the changing industrial needs of the next transition. Among these technologies, additive manufacturing processes have contributed significantly to the rapid transformation of the industrial landscape over the past decade. In particular, low volume, high value industrial sectors such as aerospace, maritime and energy industries are expected to benefit from these types of approaches. This is mainly because the production of larger quantities of customized products can be achieved in this way, followed by a reduction in industrial and economic waste, a reduction in operating costs and a reduction in environmental impact, and is gaining increasing recognition as a promising and sustainable additive manufacturing. process in the 'Industry 4.0' era. Scale-up studies attempt to shed light on the pressing question of which industrial approaches are best followed in process optimization. But in order to optimize electroforming and use it effectively in industry, systematic scale-up studies need to be conducted. Informed simulations can provide much-needed insight into the novelties and limitations of the process, thus scaling up modeling studies. is crucial. In particular, electroforming of nickel without additives could also play an important role in the coveted "green" transition of lightweight manufacturing. Even within the currently available infrastructure, the same electroforming reactors can remain in service for years with proper maintenance, the stainless steel cathodes (mandrels) and titanium anodes can be reused and recycled, while process efficiency (especially with sulfamate baths) is generally low. almost 100%. The risks of using nickel can easily be reduced, while developments in nickel recovery and recycling are becoming increasingly promising. Model studies can further assist with process optimization at all three sustainability levels (system, process and product). Because end products in electroforming can have different scales and requirements, informed modeling studies can assist in effective tool and process design for different cases. In this way, important process parameters such as deposition duration, applied flows, heating and stirring requirements or even quantitative material requirements can be refined on a case-by-case basis. To better understand the process and its potential, a systematic nickel electroforming modeling was followed; starting with primary current distribution (PCD) simulations, which depend solely on the geometry of the system, and moving on to introducing kinetic contributions through secondary current distribution (SCD) studies and finally developing models for tertiary current distribution (TCD), supplemented with the introduction of mass transfer effects. In practice, time-dependent nickel electroforming models at different scales were developed and investigated using COMSOL Multiphysics®, a commercial finite element method software. The models have been experimentally validated. Electrochemical experimental data, collected through polarization studies, were used as input to the models. The boundary conditions at the cathode and anode were based on the overall nickel reduction and dissolution reactions, respectively. Current potential data were used to determine exchange current density, equilibrium potential, boundary current, and anodic and cathodic charge transfer coefficients. Modeling and experimental results were interpreted in terms of the distribution and uniformity of the deposit thickness. PCD modeling provided a preliminary insight into the electrochemical behavior of the system, confirmed the direct relationship between current and thickness distribution, and highlighted the dependence of the simulated results on the geometric configuration of the setup. SCD simulations were then used for mesh, geometry and kinetic sensitivity studies, followed by TCD simulations involving multiple species and reactions. These studies confirmed that commercial simulation software can reliably model precision electrodeposition processes such as electroforming. At the same time, the credibility of the models depends on good quality input parameters obtained through practical experiments. Among other observations, simplified SCD models have been shown to be effective for modeling processes unaffected by tertiary phenomena. Focused studies on how the size, geometry and configuration of an electroforming reactor can affect the final product suggested time- and cost-effective changes to the setup itself that could lead to process optimization. Overall, computational studies have enabled the development of a research approach aimed at optimizing both electroforming simulations and application in production lines. Figure 1

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The shale gas revolution has revived the interest in the production of Olefin because of the abundance of Ethan as a resource source.of oil in the light of IT recent development.) is formulated on the basis of a superstructure that catches multiple plausible synthesis selternatives.The model includes linear mass balance - reactor reactores and simple sharp distillation based on distributed fractions for product recovery.To display the flow rate for each task.Facilities that work in Malaysia are implemented.And verification of the proposed model -based optimization method.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Due to the high dependence on fossil fuels, the strong effort has aimed at switching to a more sustainable world considerable economic and political effects.Or re -planned the taxes.Aggravation of the effectiveness of the proposed method.In addition, two solutions were considered. Due to the nature of the tax, the draft variables were the starting time of the 30 changing taxes.99,500 EUR/year.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Summary as experience shows the practical, reliable assessment and optimization of the total costs of logistics processes that have been implemented in supply chains of watercolor factories is a fairly complex and complicated process because it has to enclose everyone, without the exceptional section, systematic activities and ultimately transform into oneFully hom*ogeneous collection.Only solid analysis and assessment of assortment management in logistics nutrition systems in watering can in specific assortment groups makes it possible to considerably reduce the food costs.In order to solve a problem with minimizing rotary stock costs, both and costs are given, while a share is created with the help of financial volume and value of the order.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

In the light of the current market changes, several quality analyzes contribute to guaranteeing production continuity, to increase the quality of the products offered and to maintain a stable market position in the fourth industrial revolution.For the effectiveness of the general inspection points that make optimization of detection methods possible.Conformities, together with the determination of the level of efficiency and efficiency of inspection points.With a lower degree of importance and the low inspection costs.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The dairy production sector of Abstract Ireland depends on the grass -based Spring Hacon systems, which facilitates the cost benefits of milk production, but has a high degree of offer of offers.Increased plant capacity and different levels of using resources during the year.More effective by spreading the milk volumes more evenly in the year.Milk pool.The distribution of milk intake exceeds the benefit of the processor.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The effect of varying weight percentage composition (weight%) of cheap, expandable graphite (eg Intinercent Flame Retardant (IFR) system., TGA, tensile strength studies and conalorimetry. IF containing PU composites with 40% Oak, with a superiorFlame delay performance compared to the composites that only contain 20 or 10 w.t.% EC.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Successful implementation of the first phase of the CO2CRC OWAY project has shown a safe and effective CO2 storage storage in Naylor -Evaled gas field and confirmed our ability to model and control the underground behavior of CO2) and for options for CO2 storage inExhausted gas fields.The high CO2 concentration of many gas fields in the region, it is important to consider options for the integration of gas production, CO2 storage in exhausted gas fields and CO2-GR optimization within a production plan.The use of CO2-Gree can provide benefits by restoring extra gas sources and a financial shift to the costs of geological storage of CO2 from gas processing or other sources made by humans, given a future price of carbon.In the help of these figures and OWAY results, a replacement efficiency of 60 % ( % of the available pore space for CO2 storage after gas production) indicate a global potential storage capacity - in already exhausted plus reserves - of ca.750 gigatones of CO2.SelvomMany of these may not be available for technical or economic reasons, it corresponds to more than 60 years of total global stationary emissions., plays an important role in falling CO2 emissions around the world.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

As the global market becomes increasingly competitive and demanding, companies are confronted with the challenge of responding quickly and efficiently to the needs of the customer.And presents a new, cost -effective and easy -for -use model that integrates industry 4.0 (I4.0) and total productive maintenance principles to improve production processes.And the Internet of Things (IoT) services.Disse components make data collection, transmission, storage and visualization possible via both mobile and fixed devices.Belt was around 89.5% before the TPM implementation.With regard to the average time for each intervention with a reduction of approximately 53%.Management.Productivity, cost effectiveness and competitiveness.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Flexible work planning problems (FJSPs) have drawn considerable research interest because they can significantly increase production efficiency in terms of energy, costs and time;Variations in production requirements.Port the reality of the problem, two categories of simulated single machine jobs and multi-machine jobs and planning an oven model, used to compare the learning effect and performance of the new RL models with Andregorithmen.FJSPs solve.Disposit The Their central parameters cannot be effectively changed by the calculation process, the efficiency and quality of the solution does not meet the production standards.Computer tests and comparisons.This can be a competitive algorithm for FJSPs.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Production and profit in grassystems are inherently limited due to the basic balance between maximizing individual herb intake and grass use. Cow and intake Perha, seen by economic optimization for intensive grazing -based milk production in New Zealand (NZ).The existence of the fundamental reverse relationship between individual cow intake and urbage use resulting from the underlying biophysical dynamics within a grass system in connection with grass-based NZ-Environmental Companies.(grazing plus grass silage harvested in the garden) Using a relatively high stocking speed and moderate level of grazing intake per day. Cow for 450 kg Living weight cows are an optimum grass in -day..Ha -Inrame of 12–16 T DM/HA and 4.5 T DM/CO for an intake Perha of 17 T DM/HA.To maximize both at the same time, and try to maximize the individual intake, however, can impose enormous costs.grazing management.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Is additive production (AM) a sustainable process?Can the process be optimized to produce sustainable AM ​​parts and production techniques?To produce traditional sub -contractive methods.The deposited metal powder and the input volumetric energy density.Savings in the process time have a direct effect on the total costs of the component produced as a result of various components such as electrical energy, inert gas consumption and labor.Study due to the extremely high super -plastic and form of memory properties in addition to broad use in various industries such as aviation, biomedical and car.With limited or no change in chemical and mechanical properties.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Resume.The rain forest balcony near Danum Valley, Malaysian Borneo. Multi-Varate optimization against environmental concentration measurements was used to estimate the average emissions of the canopy scale for isoprene, total monoton pen and nitrogen oxide.Total monoters that give confidence in the general modeling strategy can be used when measured fluxing is not available.Monoterpenes (16%).Various factors influence the modeled VOC -Kemi.isar concentrations of methaacrolein (Macr) and methylvinylvinyl (MVK) have essentially overestimated and the hydroxyl radical [OH] concentration is essentially to be seen;Previously in Tropical Rainforest studies.Isoprene flux supplied by measurements, a significant decrease in the reaction speed for Vos with OH the only remaining opportunity to explain measurement/model deviation for OH.And oh concentrations within the mistake for the measured the chemical schedule.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Resume.The rain forest balcony near Danum Valley, Malaysian Borneo. Multi-Varate optimization against environmental concentration measurements was used to estimate the average emissions of the canopy scale for isoprene, total monoton pen and nitrogen oxide.Total monoters that give confidence in the overall modeling strategy, hire, accept, accept, accept, accept, accept, assume, and accept, and recruitment that this method can be used where measured fluxes are not available, providedThat local chemistry and mix are understood sufficiently.VOC chemistry.A simple OH -recycling mechanism influences the model of the model that fits with volatile organic compounds (VOS).Model disorder for OH.From an important role in lack of chemistry, especially in areas with a higher isoprene flux, this study shows that the inadequate in boxes and global model studies of tropical VOC chemiment errors in the chemical diagram.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Integrated energy systems have become an area of ​​interest that, with growing energy needs worldwide, is funds for producing sustainable energy from flexible sources, the key to meeting future energy needs, while keeping the carbon emissions low.The future energy mixture, because it does not broadcast harmful gases when it is used as an energy source.Scenario.Via linear programming carried out via MatLAB to minimize the total operating costs.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Ozonation of industrial and waste water sludge is a suitable process to minimize the sludge production of activated sludge processes.The subsequent biological treatment has achieved a mass reduction of 20-35% for the aerobic and 19% for the anaerobic stabilization.0.05 kg O3 Perkg of tss that must be treated.Cost reduction of sludge chonation is clear from the results presented in this article.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Anaerobic waste water treatment is in many cases a legitimate alternative to typical activated sludge processes from a technological, economic and ecological point of view.From nitrogen and phosphorus.That would enable effective biodegradation and removal of pollutants and effective production of biomethane..In this OLR interval, high efficiency was guaranteed for both waste water treatment and biogas production.Inimeride time had increased the OLR value to 8.0 g COD/L · D a significant negative effect on methane (CH4) content in biogas.The most effective variants achieved a biological breakdown efficiency of approximately 90% of the organic compounds, a CH4 content of more than 70% in biogas and a biogas yield of more than 400 l/kg COD removed.Capacity (TAC) and PH were observed, as well as a strong correlation of these indicators with the specific biogas yield and CH4 content.An effective processing process and an almost complete elimination of suspensions from the waste water.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Summary in buildings of all types of use of Single -LeVed partitions is recommended, not least for causes of cost -effectiveness and possible resource optimization.Factors influence the acoustic properties of the single leaf, plate -shaped and dry partitions.This includes the mass, bending stiffness, the location of the critical frequency and the total loss factor for the distribution and the stimulating frequency of the sound of the air, the sound defense or the characteristic impedance of the air.It is precisely in these building material pores that a hygvic, continuous adjustment of the moisture content takes place outside the production -related water volumes.Building and therefore changes and therefore the sound insulation of the wall in the air.Mechanical forces caused by stored porial water.Calculation of the Airborne Sound Reduction Index for Single -Leafed Partitions under Hygric load for saturated and partially saturated moisture conditions with high accuracy.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

The long-term analysis of the entomocom complex of plum orchards, executed in the Krasnodar territory, revealed variations in the quantitative composition of entomophauna of harmful species and the level of their harmfulness.Dominant and secondary species.The main species include Plum Grapolitha Funebrana Treitschke and Oriental Grapolitha Molesta Busck Fruit Moths, Plum Black Haploca MineLoca Christ -connected species PLUM ACALITUS Phloocoptes (Nal.) And Citrus Flatid Metcalfa Pruinosa and Famine Møl.P.W.J.Müller), Wood Leopard Mototh Zeuzera P) and the recording of biorgulative and biological insecticides for security systems, which have contributed to the preservation and increase in the useful fauna.and Coleoptera classes and mites of Acari -Under class.Long -term monitoring of species composition, rotation of dominant and secondary vermin species and entomophhases, variations in their number and harmfulness, seasonal dynamics, trophic relationships of plum -mentrocenosis during various environmental conditions and Intecreature of the agricultural production of the agricultural production designation-Russia.This contributes to the preservation of regional biodiversity and to the stable production of high -quality ecologically safe with minimal negative impact on the environment.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

A significant improvement area for economic efficiency for farms, especially in the context of martial arts, is the optimization of production and use of the potential of resources.Activities.Extrapolation to find the values ​​of the regression function.The main phases and characteristics of building an economic model for optimizing the resource potential of the company were identified.An optimization solution for product sales using a solution - adopted the spreadsheett tool and a strategy for improving financial efficiency.Discovered that the maximum income can be achieved by redistributing the production volumes of certain types of products and therefore the resources for their production, taking into account the standard production costs per year. Product unit, prices for products and resources.The help of modeling the research has achieved regression dependence of the costs of milk produced in household farms for the costs of feed, labor costs, wages and the number of cows.Certain types of resources on production costs and builds the corresponding graphic dependencies.

APA, Harvard, Vancouver, ISO and other styles

APA, Harvard, Vancouver, ISO and other styles

APA, Harvard, Vancouver, ISO and other styles

Abstract:

This article presents a mixed optimization method with two levels on a machine planning problem for a government machine workshop.For direct searching are suitable and suitable and suitable and suitable and suitable and suitable and suitable for handling simple unimodal problems that require fewer calculations.Overtime (for extra costs) must be allocated to each work order, the definitely second level, which operation and on which day must be granted over time to achieve the maximum benefit.From non-dominated solutions are presented in a table form to enable the production manager to choose his options based on the criticism of the work order.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Livestock-food mix or food choice that takes the least from Failers in their daily operation..Legumes. Day perverer can be aimed further research to investigate the effect of combining the following best feeding, quality shower and grain crops for the profit contribution.

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Water that is the basic requirement is important for all the living organism, human health and food production.2004). Head of the population (PCC) of water as an indicator for the level of economic development, in which water consumption per year is defined by the population as the average of water consumed by a person in one day.that almost two -thirds of the nations around the world will experience water stress in 2025.1

APA, Harvard, Vancouver, ISO and other styles

Abstract:

Modern, organically shaped building Fasades are often created by combining hundreds of flat panels, resulting in a high production complexity.The use of many repeated panels makes batch production possible and lowers the costs.Electrically charged particles randomly on the facade surface and may reject each other.

APA, Harvard, Vancouver, ISO and other styles