Page:
- What happens when an SD card is destroyed
- What causes SD -Card corruption
- How to repair SD -Card corruption without formatting - ten ways
SD -card corruption is one of the frequent problems that people have experienced for a long time.But what really happens when an SD card is broken?Many people just come across this problem without knowing what it causes or even how to solve it.
In fact, SD -Card corruption can usually be avoided if you know what it causes and you can also knowHow you can restore the destroyed SD card.That is why we have written this message to be detailed about SD card corruption and we will comment on details of the causes and how you can solve it to help you through this question.
What happens when an SD card is destroyed
How can you see if your SD card is being destroyed?The fact is that your SD card can be destroyed in various ways and that this corruption can be restored early can make it easy to solve the problem.The following list contains possible signs of corrupt SD cards:
SD cards are not detected:No SD card detected message, or your device that your SD card does not read, are two of the most typical indications of SD card corruption.
Read/write problems:If your device does not read your SD card whether you are unable to transfer data from an SD card, this is probably due to SD card corruption.
Connection problems:You may sometimes not be able to connect your SD card to other devices.In such cases it is likely that the SD card has been destroyed.However, this can also be a problem with the SD card pen.
Windows -Formatfejl:The occurrence of a Windows format error is another sign that an SD card can be corrupt and as a result you must make the card before using it.
Slow performance:If your SD card works very slowly when transferring files or doing something else, keep in mind that the card will probably be damaged.
Why is my SD card so slow [all the reasons explained]
In this article, Easus explains the reasons why the SD card slows down in detail, so that you know how to solve and prevent this problem.
SD cards appear as raw:If you are confrontedRAW SD card, it simply implies that the files on it are unreadable for an operating system.You must be aware that the SD card has been destroyed in this case.
SD cards suddenly show empty:Your SD card can sometimes suddenly take place on your smartphone, which is probably a sign that it is corrupt.
SD -card freezes or stuck:Another typical indicator of a broken SD card is that it can be regularly freezed during use.
SD -Card does not load images:Images are more easily influenced by file corruption.Therefore, like that the SD card is damaged as many images with file errors appear on an SD card.
What causes SD -Card corruption
There are various factors that cause SD card corruption and pay attention to these variables will help you prevent this.In the process, the possible causes that SD card corruption can cause:
- Collected bad sectors:Therefore, when a small cluster of data on your SD card cannot be available, it is marked as a bad sector.SD card is therefore destroyed if there is an accumulation of bad sectors.
- Error with file system:An SD card can be destroyed for various reasons, including incorrect closure, incorrect design and in general irregular use of your SD card during writing activities.
- Malware:Another common cause of file corruption is malware effects, because an attack on your SD card can make the affected data illegible by your operating system.
- Preparation defects:SD -card corruption can sometimes be due to a problem while producing your SD card.In this case you can see signs of corruption with the first use of the Sandisk card.
- Injury:Physical damage is a common cause of corruption in SD card.If you do not keep your SD card in good condition, it will probably be destroyed.
How to repair SD -Card corruption without formatting - ten ways
SD card corruption is a bad problem for most users and they love to solve it for better experience.But what should we do to solve this problem without formatting? Use the following ten effective methods to fully resolve it:
- Fix 1. Check bad sectors
- Fix 2. Check the file system error
- Fix 3. Change a card reader
- Fix 4. Probeer chkdsk -command
- Fix 5. Try to use an SD card on another PC
- Fix 6. Assign a new drive letter
- FIX 7. Install SD card drivers again
- Fix 8. Brug Windows Repair Tool
- FIX 9. Use Disk area command
- Fix 10. Bed SD -card manufacturer for help
Let's start with the first solution and arrange the bad sectors on the SD card.
Fix 1. Check bad sectors
A bad sector is part of your SD card that is neither readable nor writing, and accumulation of bad sectors is an important cause of SD card corruption.That is why you must check the bad sectors on the SD card.This can be easily done by help fromLetus Partition Master Professional, like millions of users, trust.
To immediately solve the problem of SD card corruption, Easus Partition Master will mention a full surface inspection and the bad sectors on your SD card and it will help you achieveRepair of a bad sector.
Free download
Windows 11/10/8/7100% sure
These steps lead you through:
Trin 1.Open Easeus Partition Master.hoy Click on the disk you want to check and then click "Surface Test".
Trin 2.The operation is carried out immediately and all bad sectors are marked as red.
Fix 2. Check the file system error
Control for errors of the file system orDivisional errorOn the SD card is another thing that you can do to solve SD -Korte corruption;The easiest way to do this is with Easyus -Partitiemaster.
In general, the Mastition -Master of the Easyus offers a reliable way to manage storage devices such as SD maps.If you want to repair SD card corruption, you can use this tool to check for system error on the card;After discovering the errors, it helps to be carried out automatically.
Free download
Windows 11/10/8/7100% sure
Trin 1.Right -click on the target partition that has a problem.
Trin 2.Select "Advanced"> "Check file system".
Trin 3.Confirm whether you want to hide the partition or not.
Trin 4.In the file system window, check the "Try to resolve the error if found".
Trin 5.Click on "Start" to check the error on your partition.
All you have to do is download the tool, implement it, select your SD card and perform the file system control.
Fix 3. Change a card reader
Your card reader can cause the problem with the SD card that you experience.So use different card readers or even a USB card reader if you have previously used an SD card reader with your computer to exclude this option.
By trying these more options, you can identify whether the problem is with the SD card, the card port of the computer or the card reader.
Fix 4. Probeer chkdsk -command
UserChkdskAssignment is another method for repairing SD card corruption without formatting.This order aids is built into the Windows operating system to investigate disk space and disk use to generate a status report that describes the file system errors that have been discovered and repaired.
How to useChkdskCommando:
Trin 1.Connect the SD card to your computer.
Trin 2.PressWindows + aWrite to open the Windows search fieldCMDIn the profession and click onRun as administratorUnder assignment prompt result.
Trin 3.Enter the assignment below in the command prompt and pressEnter.But make sure you replace "F" with the exact drive letter on your SD card.
chkdsk f: /r /f
Trin 4.Wait patiently until the tool is performed and the SD card problem must then be solved.
Fix 5. Try to use an SD card on another PC
The SD card itself cannot even cause SD card corruption signals that you experience in some cases;They can be caused by your PC earlier.To exclude this option, it is recommended to use the SD card on another PC and to see if the problem still appears.
To check this, you can use a friend's computer.If you are sure that the SD card is in perfect condition, you must solve your Windows computer instead.
Fix 6. Assign a new drive letter
On your computer, each connected SD card automatically has a drive letter assigned to them.But when there is a conflict in the disk used with your SD card, this can result in corruption sign, what the reason can be why you experience this problem.
However, assigning a new letter to the SD card can help solve the problem, and here is how to do it:
Trin 1.PressWindows + R.to openDriving commandBoks.
Trin 2.You have to write in the boxDiskmgmt.mscand touchEnterto openDisc controlwindow.
Trin 3.Right -click on yoursSD cardand chooseChange the driving letter and the pathS.
Trin 4.Tap the resulting dialog boxChange.
Trin 5.Now select a new drive letter and click onMagnTo save the changes.
You may also like this:
What is disk control
FIX 7. Install SD card drivers again
When you connect an SD card to your computer, Windows automatically installs an updated driver.However, there may be a problem with the installation of the drivers, which means that your SD card works.
Therefore, install the SD card driver manually again by following the steps below:
Trin 1.Right -clickBeginMenu and selectDevice administrator.
Trin 2.Navigate to the Device Manager windowPortable devicesAnd double -click it.
Trin 3.Right click on the SD card setting and selectUpdate Driver.
Trin 4.to electBrowse my computer to Driver softwareAnd select an updated driver's driver card.
Trin 5.Follow the requests on the screen to complete the process.
Fix 8. Brug Windows Repair Tool
The Windows repair tool is a built-in capacity on Windows PCs for Inspection of Schijven for errors and can be used to tackle the SD card corruption problem without formatting the card.
Below you will find how you can use Windows repair tool manually to resolve SD card corruption:
Trin 1.PressWindows + S, typeThis PCIn the search box and click onThis PC.
Trin 2.Right -click on yoursSD cardand chooseCharacteristics.
Trin 3.Switch toToolsThe tab and selectControl.
Trin 4.click onScan and repair drive.
Then wait until the process ends and your SD card must be repaired.
FIX 9. Use Disk area command
Sliding area command can also be used to resolve a damaged SD card, because it updates the status of your SD card and will repair any errors on it.
To repair a damaged SD card with disk area command:
Trin 1.Put the defective SD on your computer.
Trin 2.PressWindows + S, typeCMDand click onRun as administrator.
Trin 3.TypeDisccommissioned and busyEnter.
Trin 4.Typ andFrameand pressEnter.
Trin 5.TypeSelect Schijf assigned the number to your SD cardand touchEnter.
Trin 6.Type nowTo recoverand pressEnter.
This updates your SD card and thus resolves errors.
Fix 10. Bed SD -card manufacturer for help
A final thing you can take with you, if the above solution does not work, requires help from your SD card manufacturer.This is because the problem can be a production error and they can best guide you on how you can solve it.
You can visit the manufacturer's website and use their contact menu to reach them.
Conclusion
The most common solution for SD card corruption that most individuals affects is to format the SD card.This does not have to be the only solution you can use, because there are other ways to repair SD card corruption without formatting.We went into the details of fixing SD card corruption without formatting in this article, so that you can use them without problems if your SD card is destroyed.
Also see:
How to make the SD cardFormat raw micro SD -soon format
Frequently asked questions about what happens when an SD card is destroyed
You will find answers here if you also have some of the following frequently asked questions about SD card corruption.
1. How does an SD card on Android do incorrect?
If your SD card is destroyed on Android, there are the recommended steps to resolve it:
Make a back -up of your data in a different storage:
To ensure that you save the data on the SD card while trying to solve this problem, take the file back for a different storage.
Formatting SD -card on your Android -telephone:
Here are the steps for drawing up an SD card on Android:
Trin 1.Go toInstitutionsOn your Android phone and
Trin 2.NavigateBulletinPossibility on the Settings page and click on them.
Trin 3.On the resulting side you must findFormat SDMap setting and click on it
Trin 4.Follow the prompt on the screen to start the process and wait until the SD card is made up.
If this method does not solve this problem, you can use the other methods discussed in this article.
2. Why are my files on the SD card broken?
A number of factors can cause SD card corruption.The most common comprises physical damage, viruses, accumulated poor sectors and file system errors.
3. How do I know if my SD card is broken?
There are a number of indications that your SD card is defective;Among them is no SD -detected error, reading/writing problems, slow performance, freezing of SD cards, SD cards are suddenly empty and many others.If you observe these things, try these things to solve the problem with the help of the guidelines specified in this article.