Outdoor fencing is a long-term investment for any property with pets, livestock or livestock. Fences help divide and protect property, confine and exclude animals. Gates provide access to and from the property, whether you are trying to get in or keep animals out.
Fences are practical, but having to open a gate manually can be difficult. There could be dozens of animals between you and the gate. You may also be concerned about whether the animal will be injured or escape through the fence.
Maybe you're alone in your truck, delivering supplies to your flock through the gate. Getting in and out to open the gate, drive through and then close the gate is a hassle. A non-electric livestock fence is a better option.
What types of drive-thru livestock gates keep livestock inside?
Cattle guards or gates are parallel rows of sturdy tubes that span the gate. There are mainly cattle in it, because cattle don't want to get their feet stuck.
However, these guards won't necessarily keep out predators like coyotes. Horses can get their feet stuck in the grid and damage tendons and ligaments. However, this type of gate can be very effective at keeping livestock inside. These cattle guards have many advantages.
Bump gateis another option. While sitting in your vehicle, gently bump the gate with your arm, which then swings open to allow the vehicle through and closes the gate behind you. Some threshold gates operate without electricity and use only mechanical and gravity means. To make your gate automatic, add a gate accessory. Some garden gate openers are powered by electricity, but newer technology uses solar energy to operate the gate opener, eliminating the need for electricity at all. These gates may require maintenance over time, and installation is usually DIY, but will take a few hours of your time to set up.
Benefits of keeping livestock within livestock panel gates
The major advantage of cattle fences is that cattle do not leave or escape from your property. This can be a very expensive and time-consuming experience.
Livestock fences are inexpensive if you have gaps in the fences that you don't want livestock to pass through, but still need equipment to gain entry. The bars prevent the cattle from getting through. In general, you can place the cattle gate anywhere along the fence, but you will need to take into account how it will stay in place and how often it will be used by certain vehicles. You should also ensure that the area allows water to drain and whether the slope of the land is uphill or downhill, or whether the gate should be placed on a level surface.
Frequently asked questions about livestock gate attachment
Livestock gates can be temporary or permanent. If you have a gate opening that requires a makeshift fence, cattle gates can be installed quickly and without professional help. You can still enter your property while your livestock is protected from egress.
These gates can be run over by even the heaviest agricultural vehicles, tractors and trailers, provided the gate itself is built sturdy enough to compensate for the pressure placed on the threshold. One problem with livestock fencing is that you need traditional fencing where you can move the animals between different pastures and to different parts of the farm. But livestock fences are effective measures to keep livestock in place. Using cattle fencing next to a traditional gate can prevent escape from the main gate.
Cattle fences require little maintenance.
They can be installed where certain types of fencing are not suitable. In the US they are most commonly used on roads, but livestock guards can be used if you want to keep your livestock out of dangerous areas on your property and you cannot keep an eye on them 24 hours a day, 7 days a week. You never have to worry about someone forgetting to close the gate when you use livestock gates, as they retract automatically via a pulley mechanism built into the gate bracket.
Note: Do not install ports in the wrong places
A big mistake that many people make when installing fences is placing the gates in the wrong places. You want to be sure that the area where you are installing a patio gate is well drained and that you do not have to rush in or out of the site. If you enter your port too quickly, the system will wear out much faster.
Rain, mud and traffic worsen the situation. Traditional cattle gates allow rain and mud to pass through, but must be placed where the soil will not erode to ensure the gate stays in place. Gate fittings do not require the same environmental conditions and are a good solution in bad weather. However, they still require a little attention to detail in installation so that you can get the most out of your gate hardware without any major obstacles.
Corner gates allow you to use the fence to drive animals in and out. But you also need to consider normal traffic patterns. Do you want people and vehicles to move along the fence? Do you need extra space to get large agricultural equipment on or off the plot? If you have a large gate, cattle fencing can be placed over a larger area. Push gate mounts can be installed for a farm or ranch gate up to 20 feet, you will need an 8 inch wooden post securely set in concrete or hammered into the ground. Therefore, make sure you install the correct size gate.
If in doubt, go to the default setting.
- For pedestrian traffic, a gate must be at least 4 feet wide.
- For trucks and livestock, a width of 10 to 12 feet is sufficient.
- If you expect to move machinery through the gate, a distance of 5.5 meters may be necessary.
Make life more bearable
Drive-thru cattle gates make it easier to manage the gates when you are alone. You can choose from many types of gates. The most important thing is that you have a fence that will keep livestock in while allowing you to easily enter and exit your property. Plan and place your fence and gate hardware strategically so they last for years to come.
