Dilunning relationship: A manufacturer manual to get the best out of your product.The MOT seems to be tensioning, but math is simple
Instructions for thinning your chosen product can be distributed in a number of ways.The normal 3 are dilution conditions, percentages and 1L examples (ie 200 ml product for 800 ml of water).We follow this blog from our recent video 'Dilunning relationship - what are they?'And will explain how you can prepare a relationship correctly.
You may have looked at a relationship before and was completely discouraged.Unfortunately, information on this subject is scarce and usually wrong, unless you dive deep.There are many online calculators that offer a fast and simple way to train the measurements, you must need it but are usually wrong!We will use our productCitrus Pre WashAs a primary example of the blog with a dilution ratio of 1: 8.
So,What is a relationship?Simply put, this is an instruction that can be transported to a container with any volume that you tell how many parts of a product you have to dilute with water.If you know the calculation, a relationship is much easier than other instructions about dilution, as we have outlined above.A relationship, such as 1: 8, can be read as 1 to 8 or 1 part to 8 parts.This is how we find out ...
The calculation
- As a rule, add the relationship numbers together.
- So our example is 1: 8 ... 1+8 = 9
- Then determine the size of the container in which the product is diluted.Your average foam lance & trigger bottle is 1L, so we use this as an example.
- Convert volume to ml up to 1000 ml.
- Take your container volume and share it with your extra relationship.
- 1000/9 = 111 ml.
- This is your product measurement.
- 1000/9 = 111 ml.
- Drag your product measurement out of your container size.
- 1000 ml - 111 ml = 889 ml
- This is your water measurement.
- 1000 ml - 111 ml = 889 ml
- Mix the two together and voilà!
A few other examples
Classic detergent for all purposes- Verdun 1:10
Trigger -fles: 1L
1 + 10 = 11
1000/11 = 90 (completed)
1000 - 90 = 910
Answer: 90 ml product for 910 ml of water.
Advanced interior cleaner- Verdun 1:20
TriggerFlaske: 1,5L
1 + 20 = 21
1500 /21 = 71 (completed)
1500 - 71 = 1429
Answer: 71 ml product for 1429 ml of water
Eat enzyme scent- Verdun 1: 5
Triggerfles: 950 ml
1+5 = 6
950/6 = 158 (completed)
950 - 158 = 792
Answer: 158 ml product for 792 ml of water
More product is not always!to takeImprintFor example, one of our spray-on-buddles that contains siliconeless is actually more!Silicone can cause spotting about the use of this product and create more work in the long term.This special example does not harm your paint, actually it will often wipe with rapid detailing, such asCitrusbling.But there are harder products that may not be pH -neutral, such as our alkalineVery wheels;Great for lacquered wheels, but for those who can be effortless, under dilating soft, it can significantly damage the wheel.As a general rule, if the product contains silicone or is not pH -neutral, stay on the dilution lines of the manufacturers for the best result.For these pH - neutral products, you can generally get away with a stronger dilution - sometimes it can benefit you in the ground ...
So,I have to comply with the manufacturer's dilution relationship?Generally as close as you can.We recommend these conditions based on performance and bang for Buck.We don't expect them to be followedmlBut around the recommendation is our advice - after all, there is some leeway.
Have you not seen our introduction to a video of dilution relationship?click here
We burn your lens for car care and offer you the possibility to improve the appearance of your vehicle, so that you are proud of the results on which you can easily achieve morehttps://www.valetpro.global/
