How frequently asked questions | Product tip from CLR Brands) (2024)

In a well-ventilated area, mix equal amounts of calcium, lime and rust remover and warm water. Test on a hidden area before applying to the entire surface. Apply directly to the stain with a brush, cloth or sponge. After 2 minutes, rinse immediately with cold water. Never leave Lime, Lime and Rust Remover on a surface for more than two minutes. If the stain persists, repeat this process, adding more calcium, lime, and rust removal solution as needed. Never mix calcium, lime and rust remover with other household cleaners or bleaches. Always read the manufacturer's instructions for the item you are cleaning to ensure this product is compatible. Consumer judgment is always advised.

Mix one part (e.g. 1 cup) Calcium, Lime and Rust Remover with eight parts (e.g. 8 cups) water (for automatic filter coffee machines with 10-12 cups). Run through the coffee machine as if you were making coffee. Discard the solution when the product has completely run through the machine, then fill the entire pan with clear, cold water and run a full cycle twice. The instructions are for a normal 8-12 cup coffee maker. *Do not use limescale, limescale or rust remover in coffee machines that permanently retain water. *Calcium, lime and rust removers are not recommended for Gevalia, Keurig or Cuisinart coffee machines. *Do not use limescale, limescale or rust remover in espresso machines. Always read the manufacturer's instructions for your coffee machine before using Calcium, Lime and Rust to ensure the products are compatible. Some coffee machines contain permanent carbon/charcoal filters. Consumer judgment is always advised.

Yes, calcium, lime and rust remover has been shown to be safe on fiberglass. Always try to test in an inconspicuous spot first. Start with a mixture of Calcium, Lime and Rust Remover and water and work up to full strength if necessary.

Calcium, lime and rust remover should not be used in or on a car radiator. Calcium, Lime and Rust Remover may not be compatible with the materials associated with a radiator and may have adverse effects if Calcium, Lime and Rust Remover is not rinsed out completely.

We do not recommend the use of Lime, Lime and Rust Remover on natural stone, including granite. The chemicals in Calcium, Lime and Rust Remover can remove the seal and penetrate the stone.

We do not recommend the use of calcium, lime and rust remover on a car. The acids in our product should not be used on aluminum or any painted/coated surface. You can safely remove rust from car wheels (if the rims are only made of chrome or stainless steel, no alloys).

We do not recommend the use of lime, scale and rust remover on cast iron. The acids in Calcium, Lime and Rust Remover can attack the metal.

Calcium, lime and rust remover should not be used to clean carpets or rugs. Calcium, lime and rust remover can break down the fibers in carpets and rugs and strip the color.

Unfortunately, we do not recommend the use of calcium, lime and rust remover on swimming pool tiles. It can remove the finish from the tile. In addition, if Calcium, Lime and Rust Remover comes into contact with chlorine, toxic fumes can be formed. We recommend that you consult a pool maintenance professional for their advice on products that are safe and effective.

We do not recommend the use of Lime, Lime and Rust Remover on natural stone, especially on marble (even synthetic). The acids in our product remove the seal, penetrate the marble and can damage the natural beauty of the marble. Even synthetic marble is coated and real marble dust is used to achieve the effect of real marble. If you accidentally spill calcium, lime and rust remover on these surfaces, call a marble professional for further instructions.

We do not recommend the use of lime, scale and rust remover on galvanized metals. When a metal is galvanized, a zinc layer is applied over the metal (usually to protect it from rust). The acids in Calcium, Lime and Rust Remover remove the zinc, which can damage the material.

No, Calcium, Lime and Rust Remover should never be used on clothing. Find a suitable stain remover or detergent. If calcium, lime and rust remover is spilled on the fabric, rinse it off immediately. It can break down the fibers in clothing and/or fabric.

It is not recommended to use calcium, lime and rust remover in steam irons. The acids in our products are not compatible with the components of steam irons, steamers or steam engines. We recommend that you contact the manufacturer of your specific steam iron, steamer or steamer for their recommendation of products that are safe and effective for their materials.

If it doesn't seem like the Calcium, Lime and Rust Remover has helped at all, the lenses may be etched and there is no way to fix this.remove the haze from the glasses. The haze actually consists of small cuts in the glass, caused by deposits in the water. The only thing that can remove the etching is goldsmith's polish.

Nastyremove hard water stainswe recommend using a 50/50 solution (equal parts calcium, lime and rust remover and warm water) in a glass or porcelain bowl. Apply the solution to the affected colored areas of the glass with a damp cloth or sponge. After 2 minutes, rinse thoroughly with cold, clean water. If the Calcium, Lime and Rust Remover seems to have helped somewhat, but the lenses are not completely clear, repeat at full strength if necessary. Due to calcium's natural density and hardness as a mineral, calcium can actually etch and embed itself into the glass material (usually present by a cloudy appearance versus dullness).

Use only on metal filters. Dilute equal parts Calcium, Lime and Rust Remover and warm water in a plastic container. Immerse the filter in the solution for about two minutes. Brush to loosen the deposits and rinse with cold, clean water. Let dry.

No. The two products have different ingredients and, like any cleaning product, should never be mixed with another cleaning product.

We do not recommend putting Calcium, Lime and Rust Remover in a spray bottle. Calcium, Lime and Rust Remover is acidic in nature and the solution may "splash back" onto your clothing or into your eyes or onto materials for which it is not intended.

Jelmar does NOT recommend the use of calcium, lime and rust remover in or on water heaters (tank or tankless); but there is a website that does. Again, JELMAR does not recommend use in a water heater. The chemical composition of Calcium, Lime and Rust Remover is not compatible with materials or components in a boiler and cannot be thoroughly flushed through the boiler after 2 minutes. We recommend using what the water heater manufacturer considers safe and effective.

We do not recommend the use of calcium, lime and rust remover on or in materials related to a swimming pool. Lime, lime and rust removers should never come into contact with chlorine (or other household chemicals). It can form a toxic gas and is not safe. We recommend that you consult a pool maintenance professional for product recommendations that are safe and effective.

We do not recommend using our Calcium, Lime and Rust Remover to remove oil. When Calcium, Lime and Rust Remover is mixed with oil, the concrete darkens, which is very difficult to remove.

Calcium, Lime and Rust Remover can not only remove the finish of brass, aluminum and copper, but can also remove pitting from certain types of brass, copper and aluminum.

Do not use calcium, lime and rust removers on natural stone or marble (including cultured marble), terrazzo, colored grout (any color other than white), painted, coated, sealed or metallic glazed surfaces, plastics, laminates, Formica, Corian, aluminum , galvanized metals, nickel, oil-rubbed bronze, brass, copper, steam iron, lead crystal, refinished barrels or any damaged or cracked surface. Lime, lime and rust removers can attack older sinks, bathtubs and tiles. Lime, lime and rust removers are corrosive. Avoid contact with wood, clothing, wallpaper and carpets. Some laminated surfaces (table tops) are covered with a synthetic surface that can be attacked by rust removers; clean up spilled liquids immediately. Always try to test in an inconspicuous spot first.

Although they both come from the beautiful CLR Brands^TMfamily, they are formulated differently and solve different cleaning problems. See each product label for recommended uses, along with helpful information on our website.

Yes, Calcium, Lime and Rust Remover is septic safe. When it reaches the septic system, it is neutralized with water.

We do not recommend the use of calcium, lime and rust remover to clean ice machines. The acids in our product are not compatible with ice machine parts. We recommend always consulting the manufacturer's recommendations for safe and effective products to use on their materials.

We recommend pouring small amounts down a sewer drain, followed by cold water, or flushing small amounts at once down a toilet.

We recommend using or throwing away Calcium, Lime and Rust Remover within 3 years. Make sure the cap is properly secured after each use.

Whencleaning a shower headwe recommend using a 50/50 solution (equal parts) of calcium, lime and rust remover and warm water. If possible, remove the shower head and immerse it in the solution for no longer than 2 minutes (using an old toothbrush on the front of the shower head after it has been soaked will help remove the built-up minerals) and then rinse immediately and thoroughly with cold water. water. Repeat at full strength if necessary and rinse thoroughly after each application.

Pour enough calcium, lime and rust remover to cover the bottom. Swirl around in a pot or pan. Add a cup of warm water, let the mixture steep for two minutes and rinse thoroughly with cold, clean water. It is recommended to use a soft scouring pad while our product is on the stains. Always check with the manufacturer of your coffee pots, pans and tea kettles first for their recommendations for products that are safe and effective for their materials.

For cleaning a dishwasherRemove the detergent before using Calcium, Lime and Rust Remover. Pour 1/2 cup of calcium, lime, and rust remover directly into the bottom of an empty dishwasher (no glasses, dishes, or silverware, but the racks can be left in place). Perform a normal cycle, followed by an additional rinse cycle. Make sure there are no cleaning agents or other chemicals in the machine when using our product. Washing Machine: Run your empty machine (without clothes) without detergent to the main sink, where the water stops and the cycle vibrates. Stop the machine and add half a cup of calcium, lime and rust remover directly into the tub of the machine. End of cycle. Run an additional full cycle (wash and rinse) with water only to completely rinse the machine. If your machine is HE (High Efficiency) and/or 'Water Saver' we recommend using a 1/4 cup of calcium, lime and rust remover instead of the normal 1/2 cup recommended for any other type washing machine/dishwasher. For front-loading machines, simply add 1/2 cup of calcium, lime and rust remover to the soap dispenser (1/4 cup for HE machines only). After the full cycle is complete, perform an additional rinse cycle using water only. Please make sure there are no clothes or other chemicals in the machine when using our product.

The ingredients are septic safe, but it has not been tested for septic safe certification.

The ingredients are septic safe, but it has not been tested for septic safe certification.

Although our Tarn-X tarnish remover can be safely used on copper, we do not recommend its use on outdoor copper, such as roofs or awnings, as it may damage the natural patina of the copper due to the variation in copper qualities. outdoors, as well as weather elements such as humidity, temperature and humidity.

Yes. Resin is a type of plastic and garden furniture cleaner and is safe on white and colored resin, including resin furniture and resin for sports or play equipment.

Our product is only safe to use on fully cured and oil-based painted surfaces. Always sample first. Do not use on powder coated or aged/worn painted surfaces.

Septic System is safe on pipes and porcelain and works on fats, oils, grease and other stubborn organic material.

The Spotless stainless steel cleaner is a water-based formula. This means you will NOT get an oily residue after using this product. When cleaning your stainless steel surfaces, spray the entire surface and wipe with a clean, soft cloth, following the grain of the stainless steel.

Yes. Our Brilliant Bath is only safe and effective on the glass (avoid any contact with the door frame, molding or rail as these are usually made of aluminium) of a shower door. The best way to apply it to the glass is to spray some Brilliant Bath onto a damp cloth or sponge and apply it to the affected colored areas of the glass. After 2 minutes, take a clean sponge/cloth and clean cold water to remove the solution. Do not spray the doors as you will get the product on materials it is not intended for.

No. The active ingredients in Brilliant Bath react with the marble.

Even with the ability to clear a blockage from up to 15 meters away, you can rest assured that healthy plastic or metal pipes are not at risk.

Visit our 'Retail Locator' section of the website for a full list of participating retailers.

Visit our "Store Locator" section of the website for a full list of participating retailers.

If the hood and stove are left for too long and begin to dry, it can be very difficult to remove.

Do not use on stone, mirrors, plastic laminates, wood, textiles, painted surfaces or wall coverings.

Drain openers work on any clog, including hair, grease, food debris and soap scum.

Range hood and stove can be used on concrete, terrazzo, granite, asphalt, stone floors and grills to remove oil, grease and tar. You can also use the range hood and stove on factory and garage floors, pool decks, sidewalks, furnaces, engines, machinery and driveways. Surfaces with a high oil/wax content can be adversely affected.

Drain openers can be used to clean clogged sinks and tubs, slow drains, double sinks, toilets, shower drains, floor drains and waste management.

Drain Opener is safe to have in your family because it is non-toxic. It contains no harsh chemicals, acids or lye. It is not polluting and does not contaminate groundwater. Even the can can be reused!

Yes, Brilliant Bath is absolutely safe for acrylic. Follow the directions on the bottle and rinse after 2-3 minutes.

To keep your pipes flowing freely and prevent blockages, we recommend using a drain opener monthly.

There are up to 15 uses in a 4.5 oz. can opener. Do not hold the can down for more than 1 second. As you press further, less is available for use.

Range hoods and cookers should only be left on a surface for 1-5 minutes and then rinsed with cold, clean water. If the stain persists, repeat the process.

50 feet down in a 1.5" diameter pipe", 40 feet down in a 2" diameter pipe", 35 feet in a 3.5" diameter pipe, 25 feet in a 2" diameter pipe a 4" diameter, 18 feet in a 5" diameter pipe

Drain Opener is a compressed gas. When the formula in the can is released and comes into contact with water in your drain, it quickly expands, creating a standing wave. It uses the water in your pipe as a battering ram to break through the clog and clear the walls of your pipe.

To achieve the best results in front loading washing machines, the product should be applied once a week, shortly after using the machine. After application, the surfaces must dry. If mold remains on the surface for another week, such as rubber gaskets or joints, the mold can settle into the surface, causing the product to no longer work effectively.

To use the range hood and stove, wipe the area clean of heavy dirt and dust. Stains such as tar or heavy grease should be scraped off as much as possible with a putty knife before cleaning. While wearing rubber household gloves, test a small, hidden area of ​​the surface first before cleaning the main area. Pour or brush at full strength to an area no larger than 12" x 12". Depending on the size and severity of the stain, allow the solution to work for one to five minutes. Clean the area with a clean brush or broom until the stain is loosened. Rinse immediately with cold, clean water. Repeat the process if necessary. Do not use the extractor hood and the cooker together with other cleaning agents, bleaches or acids. If you are cleaning near grass or shrubs, rinse the grass and shrubs before and after cleaning.

Always use Brilliant Bath in a well-ventilated area while wearing rubber household gloves and test an inconspicuous area of ​​the surface before starting to clean. When cleaning, apply the solution to a clean, damp cloth, sponge, brush or directly on the surface to be cleaned, allow the foam to work and then rinse with clean, cold water. Never leave the solution on a surface for more than two or three minutes. If the stain persists, repeat the process. Do not use Brilliant Bath together with other detergents or bleaches. Never reuse the bottle when it is empty.

Yes! Drain openers work well for this annoying problem. Simply follow the clogged drain instructions (as indicated on the box or can) and make sure you fully immerse the green cap in water. Then apply the Drain Opener a little longer. Your drain runs freely again.

Yes, the septic system can be used in a camper or RV. Call us 800# (800-323-5497) to find out the correct amount for your vehicle.

Yes, Brilliant Bath is great for cleaning food and water residue in the food bowl! Spray Brilliant Bath onto the affected area of ​​the ceramic, stainless steel or plastic bowl. Leave on for 2 minutes with a sponge or scrubber to help remove stains, then rinse thoroughly with cold water. Although our product is non-toxic, we recommend that you wash the bowls first before putting food or water in them.

Only if the shower cabin does not have a synthetic coating. Be sure to test a small, hidden area before cleaning the entire shower and wipe it down to check for side effects.

Brilliant Bath can be used on chrome or stainless steel faucets and should not be used on other surfaces including, but not limited to, bronze, oil-rubbed bronze, nickel, brushed nickel, brass or copper.

Our Brilliant Bath can be safely used on granite to remove hard water deposits and stains. Granite is the ONLY natural stone that our Brilliant Bath can be used on.

No, Brilliant Bath should not be used in a washing machine or dishwasher. The cleaning agents in the product may foam too much when stirred. For these applications use Calcium, Lime and Rust Remover in the gray bottle. Brilliant Bath does not contain the ingredient needed to remove rust, only our Calcium, Lime and Rust Remover in the gray packaging does.

Yes. You can use Brilliant Bath on vinyl upholstery as long as it is diluted and thoroughly rinsed from the surface within two minutes. Research has shown that the top layer of siding is damaged if Brilliant Bath is left on the surface at full strength for five minutes or longer.

No. It is only safe to use on white grout. When used on colored grout, the grout will lighten or discolour over time.

In

Tarn-X Silver Polish should only be used on sterling silver and silver plate.

Use rubber household gloves if you have a history of sensitive skin, and always test a small area of ​​the area before cleaning. To polish your silver, shake the container of silver polish and then use a clean, damp cloth or sponge to apply the solution. Allow Tarn-X Silver Polish to dry for at least one minute and then polish to a high gloss with a soft, dry cloth. Rinse the piece thoroughly with cold, clean water and then dry with a soft cloth. Do not mix Tarn-X Silver Polish with other polishes.

Never throw Tarn-X away in your sink, toilet or rain drain. Contact your local or national environmental control agency for disposal instructions.

Yes. When working with Tarn-X products, avoid contact with your clothing. Tarn-X can stain or discolour fabrics/clothing.

The smell is the active ingredients in Tarn-X that come into contact with tarnish. This indicates that the deposits, which are sulfur, are actually being removed with Tarn-X.

Tarn-X has probably been left alone and/or allowed to dry for too long. To remove the discoloration, use a copper cream or polish and follow the instructions to restore the shine.

We do not recommend the use of Tarn-X on brass. The active ingredients in Tarn-X are not compatible with the components of brass (copper and zinc). We recommend that you only use products specifically formulated to be safe for brass.

Artificially oxidized silver is silver that has undergone chemical treatment to change its appearance and shine. It gives silver a smoky, almost black appearance. DO NOT use Tarn-X on artificially oxidized silver as this will remove the artificial oxidation treatment from the silver.

Although we don't have a solution for this, you can try to remove the stain by immediately cleaning the discolored area with baking soda applied with cold water and a soft cloth. Additionally, other customers who have accidentally brought our Tarn-X Tar Remover into contact with stainless steel have told us that liquid kitchen cleaners (such as Cerama-Bryte® or Bar Keepers Friend®) have resolved the issue.

Only if your knives are silver or silver plated. Be careful! Your knives may look "silver" but have stainless steel blades with silver-plated handles. If Tarn-X is used on the stainless steel blade it will discolor. Check the blade of your knife for a silver or stainless steel stamp or contact the manufacturer. If in doubt, test in a small, hidden area. Refer to the following questions to possibly resolve this issue.

Tarn-X should never be used on or near stainless steel as it may cause staining or discoloration. This includes stainless steel cutlery and sinks.

If Tarn-X is left on for too long and allowed to dry, it may discolour. Silver can become golden, cloudy or dark gray in color if Tarn-X is left on the silver for too long and/or dries. To remove the discoloration, fill a small bowl with 1/2 warm water, 1/2 Tarn-X and two drops of dishwashing liquid (Palmolive, Joy, etc.). Wash the item containing the mixture with a soft, clean cloth and rinse immediately with cold, clean water. Wipe the item with a soft, clean cloth. The final step is to apply a silver polish to protect the item. This should restore your piece to its original state. For large items, make sure you clean about 1/3 of the item at a time.

Silver can become golden or dark gray if Tarn-X is left on the silver for too long and/or allowed to dry on the silver. To remove the discoloration, fill a small bowl with 1/2 warm water, 1/2 Tarn-X and two drops of dishwashing liquid (Palmolive, Joy, etc.). Wash the item containing the mixture with a soft, clean cloth and rinse immediately with cold, clean water. Wipe the item with a soft, clean cloth. The final step is to apply a silver polish to protect the item. This should restore your piece to its original state. For large items, make sure you clean about 1/3 of the item at a time.

Rinsing with cold water immediately after use is one of the most important steps. If Tarn-X is not rinsed off completely, it may darken or discolor your silver. If you are cleaning multiple items, always rinse and dry each piece of towel before moving on to the next item.

Tarn-X cleans sterling silver, silver plate, platinum, copper, gold and even diamonds. Do not use Tarn-X on poorly plated silver, silver with scratched or damaged surfaces, or anything that is not in good condition. Do not mix gold and silver objects together when cleaning with Tarn-X.

For best processing, we recommend using a cotton ball or soft cloth. However, it may be easier to dip smaller items (such as sterling silver jewelry). It is important to rinse IMMEDIATELY with cold water and do not allow Tarn-X to dry. Never keep Tarn-X on an object for more than two minutes.

Before using Tarn-X, use soap and warm water to remove dirt. Rinse with cold water and dry before using Tarn-X. While wearing rubber household gloves, dip a cotton ball or soft cloth in Tarn-X and wipe off the dull areas. For larger objects, Tarn-X is applied at full strength, approximately 1/3 of the item at a time, then rinsed thoroughly. For heavily tarnished areas, repeat the above process until all tarnish has dissolved. Tarn-X only removes stains. After using Tarn-X Tarnish Remover, always apply silver polish for optimal shine and shine and helps protect your silver from rapid tarnish. After using Tarn-X, rinse immediately with cold water and dry by hand with a soft cloth. Never let Tarn-X sit for more than two minutes and always test Tarn-X on a small area before cleaning the entire area. Clean up spilled liquids immediately. Some laminated surfaces (table tops) are covered with a synthetic material that can be affected by Tarn-X. Keep Tarn-X away from stainless steel.

The purpose of the tank is to process household waste. The tank treats the waste by allowing the water to fall to the bottom, the lighter solids to float to the top and the heavier waste/sludge to go to the bottom. The sludge/solids that fall to the bottom must be treated with a septic system treatment to convert these materials into liquids, which will then flow to the drain field.

A septic system is a self-contained underground wastewater treatment system. The septic system consists of a septic tank and a leaching/absorption room.

Our Calcium, Lime and Rust Remover is non-toxic and water-soluble. The chemicals in the product are derived from vegetables, but we recommend that all safety precautions are followed as stated on the back of the bottle.

No. Be sure to rinse the furniture and grass completely with cold, clear water after cleaning.

It can be used on resin, plastic, rattan, wicker, wood, wrought iron, vinyl, PVC and canvas.

When using Outdoor Furniture Cleaner, always wear rubber household gloves and test it on a hidden area of ​​the surface before starting to clean. When cleaning, apply the solution to a clean, damp cloth, sponge, brush or directly on the surface to be cleaned, allow the cleaner to work for some time and then rinse with clean, cold water from your hose. Use a soft brush for woven surfaces, cushions and fabrics, and for smooth surfaces use a soft brush or a clean, damp cloth. If the stain remains after cleaning, repeat the process. Do not use Outdoor Furniture Cleaner together with other cleaning agents or bleaches. Never reuse the bottle when it is empty.

Always test CLR Metal Clear on a hidden area of ​​the surface you are cleaning before starting. Use in a well-ventilated area. To use CLR Metal Clear, wear rubber gloves, dip a damp cloth or sponge into the solution, quickly rub the area you are cleaning, leave on for two to three minutes, then rinse with cold water. If the surface is not completely clean, try another application. For a better shine, wipe the surface with a clean, soft cloth.

We recommend 2-3 minutes. After rubbing CLR Metal Clear over the area you are cleaning, rinse thoroughly with clean, cold water. If necessary, you can repeat the process.

Yes. CLR Metal Clear cleans chrome, stainless steel and aluminum hubcaps and wheels fantastically.

No. We do not recommend the use of CLR Metal Clear on clothing or fabrics.

No. CLR Metal Clear does not contain ingredients that are effective at removing hard water stains. It easily cleans surface dirt and makes stainless steel, chrome, porcelain and aluminum shine.

No. It can scratch the surface of the marble.

Yes, Calcium, Lime and Rust Remover is great for cleaning food, dirt and water deposits in the feeder! Dilute equal parts hot water and calcium, lime and rust remover to clean ceramic, stainless steel or plastic bowls. Leave on for 2 minutes with a sponge or scrubber to help remove stains, then rinse thoroughly with cold water. Although our product is non-toxic, we recommend that you wash the bowls first before putting food or water in them.