Change WAN to LAN - GL.iNet Router Docs 3 (2024)

FAQs

Change WAN to LAN - GL.iNet Router Docs 3? ›

Either way, the ports used to connect computers within your network are typically labeled LAN, since they are for devices on your home or business network. The port that connects the router to the outside world is usually labeled WAN, since it connects to a wider network, almost always the internet.

Either way, the ports used to connect computers within your network are typically labeled LAN, since they are for devices on your home or business network. The port that connects the router to the outside world is usually labeled WAN, since it connects to a wider network, almost always the internet.

A local area network (LAN) is a computer network that covers a small geographical area, such as an office, home or campus. A wide area network (WAN) covers a broad geographical area, such as a city or country.

To begin the setup, plug the router's WAN port into a DSL modem or broadband gateway. The DSL modem is a device that connects the DSL line to the router. Connect the DSL modem to the WAN port on the router via an RJ12 cable. Then connect each LAN port to computers, servers, and other network devices.

Connect the router to your modem using an Ethernet cable. Connect your server computer to one of the router's LAN ports using another Ethernet cable. Power on the router and wait for it to boot up. Access the router's web-based configuration page by entering its IP address in a web browser.

WiFi is Wireless LAN as in it connects you to a local network wirelessly. WAN is Wide Area Network which typically refers to the internet but could also include large campus networks that stretch over a wide physical...

To access a device on a Local Area Network (LAN) through a Wide Area Network (WAN) address, you will need to set up port forwarding on your router. Port forwarding is a configuration that directs incoming traffic to a specific device on the LAN, based on the port number used in the request.

WANs use wide area connections like MPLS, VPNs, leased lines, and the cloud. LANs are faster, because they span less distance and have less congestion. WANs are slightly slower, but that may not be perceived by your users. LANs are good for private IoT networks, bot networks, and small business networks.

What should my WAN connection type be? ›

A Dynamic type of connection is the most common. If you use a cable modem, then most likely you will have a dynamic connection. If you have a cable modem or you are not sure of your connection type, use this. A Static IP address connection type is less common than others.

A Wide Area Network (WAN) is a network that exists over a large-scale geographical area. Your modem sends and receives information to and from the internet through its WAN port.

Connect one end of the Ethernet cable to the port on the modem/router that is labeled "LAN". This may also look like Ethernet followed by numbers. Connect the other end of the Ethernet cable to your computer.

Choose More Functions > System Settings > Network port settings > WAN port, select Fixed, and click Save to disable the WAN/LAN auto-adaptive function. If you want to enable this feature again, select Auto and click Save.

If you take a look at your wireless router, you may see the abbreviations LAN and WAN, which are often next to some of the ports on the device. These two ports can be easily found in the back of the routers.

LANs use local connections like ethernet cables and wireless access points. WANs use wide area connections like MPLS, VPNs, leased lines, and the cloud. LANs are faster, because they span less distance and have less congestion. WANs are slightly slower, but that may not be perceived by your users.