As you progress through the early stages of the game, instruction screens, also known as active help windows, provide a gradual introduction to the various controls. Any previously displayed active help guides can be viewed by selecting Active Help from the system menu. When playing the Windows® and Mac versions, players can choose between mouse and keyboard controls and gamepad controls. Once a control scheme has been selected, the settings can be further customized in the Keybind and Configuration menus.
Nothing is available for the platform you selected.
Basic operationNYTopical
Change control settingsNYTopical
To change your control settings, press the Esc key or select System from the main menu. Then open the Control Settings tab from the Character Configuration menu.
Mouse and keyboard
Standard control scheme with mouse and keyboard. Read more about playing with thisControl schedule.
Gamepad
Adjusted control scheme with actions set to pass the hotbar. Read more about this hereControl schedule.
Mouse and keyboard
Standard control scheme with mouse and keyboard. Learn more about playing withControl schedule.
Controller
Adjusted control scheme with actions set to pass the hotbar. Read more about this hereControl schedule.
To gamepadsNYTopical
All XInput compatible gamepads are compatible with the game. Also, the button assignments can be customized for all gamepad models. You can do this when you log in for the first time, or via the Gamepad Settings tab in the System Configuration menu.
* If you are unable to adjust the button assignments, unchecking 'Enable POV' may resolve the issue.
The Mac version of FINAL FANTASY XIV is compatible with the following gamepads:
・Xinput-gamepads
・DUALSHOCK®4 wireless controllers
・DualSense™ wireless controllers
・Wireless Xbox One controllers
・Xbox Series X|S draadloze controllers
* If you are unable to adjust the button assignments, unchecking 'Enable POV' may resolve the issue.
Mouse and keyboard controlsNYTopical
Character movementNYTopical
You can move your character with a keyboard or a mouse. When using a keyboard, press the WASD keys to move. When using a mouse, press the left and right mouse buttons at the same time to move forward. To change direction while moving, hold down both buttons and drag the mouse left or right.
Run automatically
By clicking on the mouse wheel you can set your character to run automatically. If you hold down the right mouse button while dragging the mouse, the direction changes. If you hold down the left mouse button while dragging the mouse, the camera moves.
Hoppe
To jump, press the space bar on the keyboard. This can be used to jump over obstacles such as small rocks or low fences.
For details on other keys assigned to character gestures, seeMouse-controlInKeyboard controlssections.
* When using the WASD keys to move your character, you can choose the Standard type for character-based movements or the Legacy type for camera-based movements.
You can move your character with a keyboard or a mouse. When using a keyboard, press the WASD keys to move. When using a mouse, press the left and right mouse buttons at the same time to move forward. To change direction while moving, hold down both buttons and drag the mouse left or right.
Run automatically
By clicking on the mouse wheel you can set your character to run automatically. If you hold down the right mouse button while dragging the mouse, the direction changes. If you hold down the left mouse button while dragging the mouse, the camera moves.
Hoppe
To jump, press the space bar on the keyboard. This can be used to jump over obstacles such as small rocks or low fences.
For details on other keys assigned to character gestures, seeMouse-controlInKeyboard controlssections.
* When using the WASD keys to move your character, you can choose the Standard type for character-based movements or the Legacy type for camera-based movements.
You can move your character with a keyboard or a mouse. When using a keyboard, press the WASD keys to move. When using a mouse, press the left and right mouse buttons at the same time to move forward. To change direction while moving, hold down both buttons and drag the mouse left or right.
Run automatically
By clicking on the mouse wheel you can set your character to run automatically. If you hold down the right mouse button while dragging the mouse, the direction changes. If you hold down the left mouse button while dragging the mouse, the camera moves.
Hoppe
To jump, press the space bar on the keyboard. This can be used to jump over obstacles such as small rocks or low fences.
For details on other keys assigned to character gestures, seeMouse-controlInKeyboard controlssections.
* When using the WASD keys to move your character, you can choose the Standard type for character-based movements or the Legacy type for camera-based movements.
camera controlNYTopical
To control the camera, drag the mouse while pressing the left or right button.
Left button:
Only the camera view rotates and not your character.
Right button:
Your character looks in the direction you turn the camera.
* The camera rotation direction can be changed in the Drawing Configuration menu.
Target selectionNYTopical
You can target a character or an object such as a port or airspace by hovering the mouse pointer over the intended target and clicking the left mouse button.
With a right click you can perform one of several actions depending on the selected target.
Player character:Select as target (right click to open subcommand menu)
NPC:Start a conversation
Enemy:Enable auto-attack
Object:Interaction with the object
Mouse-controlNYTopical
Mouse-control
| Commando | Standard button |
|---|---|
| Click: Select target Drag: rotate camera | Left button |
| Click: Take action based on purpose Enemy = Auto attack NPC = Talk Second player = Open the Commands submenu | Right button |
| Move the character forward | Left + Right button |
| Zoom in/out with camera Zoom in/out on the map (if shown) | Roll the mouse wheel |
| Enable/disable Autorun | Mouse wheel button |
* The camera rotation direction can be changed in the Drawing Configuration menu.
Menu navigation
| Commando | Standard button |
|---|---|
| Select/confirm See submenu Drag area map (if shown) | Left button |
| Zoom in/out map (if shown) | Roll the mouse wheel |
| Map link (if shown) | Ctrl+right click control+right click |
Keyboard controlsNYTopical
Below is a list of default key bindings. To change keybindings, press NUM- or click System on the main menu, then select Keybinding and select the appropriate category at the top of the menu.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* If you're using a gamepad, live chat is enabled by default, which automatically logs keystrokes to the log window.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* If you're using a gamepad, live chat is enabled by default, which automatically logs keystrokes to the log window.
* On operating systems, the command key can function as a control key.
* Operating system commands for shift, control, option and all function keys take precedence over in-game systems. As such, these commands cannot be used for key bindings.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* In controller mode, live chat is enabled by default, which automatically logs keystrokes to the log window.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
* When using a keyboard with PS5™, the print screen and pause keys cannot be remapped as they are assigned to different system functions.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* In controller mode, live chat is enabled by default, which automatically logs keystrokes to the log window.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
* When using a keyboard with PS4™, the print screen and pause keys cannot be reassigned as they are assigned to different system functions.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* In controller mode, live chat is enabled by default, which automatically logs keystrokes to the log window.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
Movement
| Commando | Default key |
|---|---|
| Continue | W |
| Go back | S |
| turn left | IN |
| go right | D |
| Penalty kick over | Q |
| Punishment Right | E |
| Draw and sheath/dismount weapons | Z |
| Alternate between running/walking | NUM/ |
| Enable/disable Autorun | R |
| Hoppe | The space bar |
Camera
| Commando | Default key |
|---|---|
| Peg camera up | ↑ |
| Point the camera downwards | ↓ |
| Point the camera to the right | → |
| Place the camera on the left side | ← |
| Zoomcamera in | Side up |
| Zoom out camera | Edge down |
| Change camera | At home |
| Return the camera to the saved position | End |
| Save the current camera position | Ctrl+End control+exit |
| Return the camera to its default position | Ctrl+Shift+End controle+shift+exit |
| Turn the camera around | V |
| Lock the camera on the target | NUM5 |
| VIP camera on | Ctrl+↑ control+↑ |
| Tilt the camera down | Ctrl+↓ control+↓ |
| Face camera | Pause F15 |
Targeting
| Commando | Default key |
|---|---|
| Cycle through enemies (from near to far) | Tab |
| Cycle through enemies (from farthest to nearest) | Shift+Tab Shift+Tab |
| Facial measurements | F |
| Measure yourself | F1 |
| Target party list members | F2 - F8 |
| Target animal/known | F9 |
| Target the target of your current goal | T |
| Focus on the enemy attacking you | Shift+T shift＋T |
| Direction Focus Direction | F10 |
| Focus on the nearest enemy | F11 |
| Focus on the nearest NPC or object | F12 |
| Set/remove focus target | Shift+F shift+F |
| Scroll up through the enmity list | Ctrl+NUM8 controle+NUM8 |
| Scroll through the enmity list | Ctrl+NUM2 control+NUM2 |
| Scroll through the alliance list (forward) | Ctrl+NUM6 controle+NUM6 |
| Go through the alliance list (back) | Ctrl+NUM4 control+NUM4 |
To chat
| Commando | Default key |
|---|---|
| Klar chat-prompt | Enter enter |
| Clear text command | / |
| Temporarily change chat mode to reply (scroll forward) | Alt+R option＋R |
| Temporarily change chat mode to reply (go back) | Alt+Shift+R option+shift+R |
| Temporarily change chat mode to say | Alt+S option+S |
| Temporarily change chat mode to shout | Alt+H option+H |
| Temporarily change the chat mode to party | Alt+P option+P |
| Temporarily change chat mode to shout | Alt+Y option+Y |
| Answer (Repeat to cycle through PCs) | Alt+R option+R |
| Temporarily change the chat mode to free company | Alt+F option+F |
| Temporarily change chat mode to PvP team | Alt+T option+T |
| Temporarily change chat mode to Cross-world Linkshell (cycle forward) | Alt+C option+X |
| Temporarily change chat mode to Cross-world Linkshell (switch back) | Alt+Shift+C option＋shift＋C |
| Temporarily change chat mode to Linkshell (scroll forward) | Alt+L option+L |
| Temporarily switch chat mode to Linkshell (switch back) | Alt+Shift+L option+shift+L |
| Temporarily change the chat mode to Alliance | Alt+A option+C |
| Temporarily change the chat mode to a beginner network | Alt+N options＋N |
Other things
| Commando | Default key |
|---|---|
| To confirm | NUM0 |
| Cancel | NUM. |
| See submenu | NUM* |
| Move the cursor up/Hide up through the group list | NUM8 |
| Move the cursor down/scroll down the Party List | NUM2 |
| Move the cursor/target marker to the left | NUM4 |
| Move cursor/target marker to the right | NUMBER 6 |
| Toggle through HUD components | NUMBER 1 |
| Select the main menu | NUM+ |
| Draw/sheath weapon * While mounted: dismount | Z |
| Character | C |
| means of payment | Ctrl+C control+C |
| Free company | : |
| Linkshells | L |
| Inventory | I |
| Weapon chest | Ctrl+I control+B |
| Open Chocobo zadeltas | Shift+Ctrl+I shift＋control＋I |
| Card | M |
| Sign | Shift+M shift+M |
| Road signs | Ctrl+M controle+M |
| Actions and properties | P |
| Social | O |
| Duty seeker | U |
| Be afraid | Ctrl+U control+me |
| log | J |
| Character configuration | K |
| System configuration | Ctrl+K control+U |
| Target filter | X * |
| Preparation of logbook | N |
| Collection log | B |
| Hunting logbook | H |
| Fish log | Y |
| Fishing guide | Ctrl+Y control+Y |
| Orchestra list | Ctrl+O control＋O |
| Emotion list | (No default assignment) |
| System | NUM - |
| Switch between UI component tabs (forward/back) | NUM9/NUM7 |
| Change the UI display mode | Scroll Lock F14 |
| Take a screenshot | print Screen F13 |
| Change the window size | Ctrl+Home control+Home |
| Close the UI component/open the system menu | Esc Escape |
* When tapped, the target filter will make players, NPCs, enemies, or objects untargetable depending on your settings. Although it is disabled by default, it can be enabled by checking the 'Enable target switching' checkbox on the Filters tab under Control Options in the Drawing Configuration menu.
Movement while riding a flying mountain or diving
| Commando | Default key |
|---|---|
| Continue | W |
| Go back | S |
| turn left | IN |
| go right | D |
| Penalty kick over | Q |
| Punishment Right | E |
| Climb * While on the ground: jump | The space bar |
| Ned * While on the ground: jump | Ctrl+spacebar control+spacebar |
| Land *Only available while flying. * While you are grounded: dismount | Z |
| To dive *Only available while swimming. | Ctrl+spacebar control+spacebar |
* You can ride a flying mount after making a certain amount of progress in the game.
* You can dive after making certain progress in the game.
Gamepad controlsNYTopical
Character movementNYTopical
Character movement
Move your character with the left stick. Hold B and then use the left stick to make your character walk.
Character movement
Move your character with the left stick. Press and hold 〇 and then use the left stick to move your character.
Character movement
Move your character with the left stick. Press and hold 〇 and then use the left stick to move your character.
Character movement
Move your character with the left stick. Hold B and then use the left stick to make your character walk.
Run automatically
By pressing LB while using the left stick, you can set your character to run automatically. This can be canceled by pressing LB again.
Run automatically
By pressing L1 while using the left stick, you can set your character to run automatically. This can be canceled by pressing L1 again.
Run automatically
By pressing LB while using the left stick, you can set your character to run automatically. This can be canceled by pressing LB again.
Hoppe
Press Y to jump. This can be used to jump over obstacles such as small rocks or low fences.
Hoppe
Press △ to jump. This can be used to jump over obstacles such as small rocks or low fences.
Hoppe
Press Y to jump. This can be used to jump over obstacles such as small rocks or low fences.
camera controlNYTopical
Use the right stick to control the camera. By pressing and holding LB you can zoom the camera in and out.
Use the right stick to control the camera. By pressing and holding L1 you can zoom the camera in and out.
Use the right stick to control the camera. By pressing and holding LB you can zoom the camera in and out.
* The camera rotation direction can be changed in the Drawing Configuration menu.
Draw and dress your weaponNYTopical
By pressing LB+RB you can draw or sheathe your weapon into battle.
By pressing L1+R1 you can draw or sheathe your weapon into battle.
By pressing LB+RB you can draw or sheathe your weapon into battle.
* This action can also be performed by pressing L3 when no target is selected.
* If you are riding on a mountain, you can use this to get off.
* When riding a flying horse, this allows you to perform the "descent" function.
* This action can also be performed by pressing L3 when no target is selected.
* If you are riding on a mountain, you can use this to get off.
* When riding a flying horse, this allows you to perform the "descent" function.
* This action can also be performed by pressing the left stick when no target is selected.
* If you are riding on a mountain, you can use this to get off.
* When riding a flying horse, this allows you to perform the "descent" function.
Target selectionNYTopical
To aim a character or object, first look at your target and press A. When an aiming circle appears, press A again to perform an action depending on the target selected.
Player character:Open the command submenu
NPC:Start a conversation
Enemy:Enable auto-attack
Object:Interaction with the object
To target a character or object, first look at your target and press X. When a targeting circle appears, press X again to perform an action depending on the target selected.
To target a character or object, first look at your target and press X. When a targeting circle appears, press X again to perform an action depending on the target selected.
To aim a character or object, first look at your target and press A. When an aiming circle appears, press A again to perform an action depending on the target selected.
Player character:Open the command submenu
NPC:Start a conversation
Enemy:Enable auto-attack
Object:Interaction with the object
Target circle and selected targetNYTopical
Pressing the directional buttons displays the target circle, which allows you to select temporary targets.
Directional buttons left and right:Go through all the objectives
Up and down direction buttons:Browse the party's membership list
LB+↑/↓ :Go through the enmity list
LB+→/← :Browse the alliance list
After you select a target with the target circle, press A to change the target circle to a marker to confirm your target is selected.
Pressing the directional buttons displays the target circle, which allows you to select temporary targets.
Directional buttons left and right:Go through all the objectives
Up and down direction buttons:Browse the party's membership list
L1+↑/↓ :Go through the enmity list
L1+→/← :Browse the alliance list
After you select a target with the target circle, pressing
Pressing the directional buttons displays the target circle, which allows you to select temporary targets.
Directional buttons left and right:Go through all the objectives
Up and down direction buttons:Browse the party's membership list
L1+↑/↓ :Go through the enmity list
L1+→/← :Browse the alliance list
After you select a target with the target circle, pressing
Pressing the D-pad displays the target circle, which allows you to select temporary targets.
D-pad left/right:Go through all the objectives
D-pad op/ned:Browse the party's membership list
LB+D-pad op/ned:Go through the enmity list
LB+D kiss left/right:Browse the alliance list
After you select a target with the target circle, press A to change the target circle to a marker to confirm your target is selected.
* The target circle can still be used after confirming a selected target.
Measuring bicyclesNYTopical
By default, target cycling uses the following target settings:
By default, target cycling uses the following target settings:
Weapons clad:Go through all the objectives
Weapon drawn:Cycle through enemies and NPCs/objects
Target filter settings can be adjusted as desired.
Also select 'Enable customization'. allows further customization using LB and the four action buttons.
Target filter settings can be adjusted as desired.
Also select 'Enable customization'. allowing further adjustments using L1 and the four action buttons.
Target filter settings can be adjusted as desired.
Also select 'Enable customization'. allows further customization using LB and the four action buttons.
* To access the target filter settings, go to the Filters tab under Control Settings in the Character Configuration menu.
Menu navigationNYTopical
When using gamepad controls, players can navigate menus using the directional buttons. Use A to confirm, B to cancel and X to open submenus.
Press BACK to switch between HUD components, including the log window, minimap, and service list. Press START to select the main menu.
* When using a gamepad, gamepad icons will appear on the screen, indicating that certain actions can be performed.
Movement
| Commando | Standard button |
|---|---|
| Fluid character | Left stick |
| Move camera | Right stick |
| Change camera | Right thumb click* |
| Go through goals | Directional buttons left and right |
| Browse party members | Up and down direction buttons |
| To confirm | IN |
| Cancel | B |
| Draw and sheath/dismount weapons | LB+RB |
| Draw weapon and sheath/lock | L3* |
| Map/subcommand | X |
| Hoppe | Y |
| Run automatically | LB+linker joystick |
| Browse Hotbars | RB+Direction Button/Action Button |
| Enable Cross Hotbar action | LT/RT+directional button/action button |
| Edit cross hotbar | LT/RT+BACK |
| Cycle through enemies (from near to far) | LT/RT+RB |
| Cycle through enemies (from farthest to nearest) | LT/RT+LB |
| Scroll up through the enmity list | LB+↑ |
| Scroll through the enmity list | LB+↓ |
| Scroll through the alliance list (forward) | LB+ → |
| Go through the alliance list (back) | LB+← |
*Left thumb click and right thumb click can assign different functions. To change the default settings, go to the button configuration menu under Gamepad Settings in the System Configuration menu.
Menu navigation
| Commando | Standard button |
|---|---|
| Move the cursor | Directional button |
| To confirm | IN |
| Cancel | B |
| Subcommand | X |
| Switch between UI (Back)/Increase Value tab | POND |
| Switch between UI (forward)/lower value tab | RB |
| Cycle HUD components | RUG |
| Main menu | BEGIN |
Virtual must
This allows players to use the gamepad as if it were a mouse.
| Commando | Standard button |
|---|---|
| Enable/disable the virtual mouse | LB+right thumb click |
| Move the cursor | Right stick |
| Left button of the virtual mouse | LT |
| Virtual mouse right button | RT |
Other things
| Commando | Standard button |
|---|---|
| Change the UI display mode | LB+ BACK |
| Take a screenshot | LB+START |
| Change the window size | Right thumb click* |
* Can only be executed if the window is active.
Movement while riding a flying mountain or diving
| Commando | Standard button |
|---|---|
| Climb | Y |
| Ned | B |
| Land *Only available while flying. * While you are grounded: dismount | LB+RB |
| To dive *Only available while swimming. | B |
* You can ride a flying mount after making a certain amount of progress in the game.
* You can dive after making certain progress in the game.
When using the controller, players can navigate menus using the directional buttons. Use X to confirm, 〇 to cancel and □ to enter submenus.
* Button icons appear on the screen indicating that certain actions can be performed.
To switch between HUD components, including the log window, minimap, and service list, press the touchpad button. Press the OPTIONS button to open the main menu.
* When using a controller, controller icons will appear on the screen, indicating that certain actions can be performed.
When using the controller, players can navigate menus using the directional buttons. Use X to confirm, 〇 to cancel and □ to enter submenus.
* Button icons appear on the screen indicating that certain actions can be performed.
To switch between HUD components, including the log window, minimap, and service list, press the touchpad button. Press the OPTIONS button to open the main menu.
* When using a controller, controller icons will appear on the screen, indicating that certain actions can be performed.
Movement
| Commando | Standard button |
|---|---|
| Fluid character | Left stick |
| Move camera | Right stick |
| Change camera | R3* |
| Go through goals | Directional buttons left and right |
| Browse party members | Up and down direction buttons |
| To confirm | X |
| To confirm | X |
| Cancel | 〇 |
| Cancel | 〇 |
| Draw and sheath/dismount weapons | L1+R1 |
| Draw weapon and sheath/lock | L3* |
| Map/subcommand | □ |
| Hoppe | △ |
| Run automatically | L1+linker joystick |
| Browse Hotbars | R1+Direction Button/Action Button |
| Enable Cross Hotbar action | L2/R2+Direction Button/Action Button |
| Edit cross hotbar | L2/R2+Touchpad-knop |
| Cycle through enemies (from near to far) | L2/R2+R1 |
| Cycle through enemies (from farthest to nearest) | L2/R2+L1 |
| Scroll up through the enmity list | L1+↑ |
| Scroll through the enmity list | L1+↓ |
| Scroll through the alliance list (forward) | L1+→ |
| Go through the alliance list (back) | L1+← |
* Different functions can be assigned to L3 and R3. To change the default settings, open the Button Configuration menu under Controller Settings in the System Configuration menu.
Menu navigation
| Commando | Standard button |
|---|---|
| Move the cursor | Directional button |
| To confirm | X |
| To confirm | X |
| Cancel | 〇 |
| Cancel | 〇 |
| Subcommand | □ |
| Switch between UI (Back)/Increase Value tab | L1 |
| Switch between UI (forward)/lower value tab | R1 |
| Cycle HUD components | Touchpad button |
| Main menu | OPTIONS-knop |
Other things
| Commando | Standard button |
|---|---|
| Change the UI display mode | L1+Touchpad button |
| Change the window size | R3* |
* Can only be executed if the window is active.
Movement while riding a flying mountain or diving
| Commando | Standard button |
|---|---|
| Climb | △ |
| Ned | 〇 |
| Ned | 〇 |
| Land *Only available while flying. * While you are grounded: dismount | L1+R1 |
| To dive *Only available while swimming. | 〇 |
| To dive *Only available while swimming. | 〇 |
* You can ride a flying mount after making a certain amount of progress in the game.
* You can dive after making certain progress in the game.
When using the controller, players can navigate menus using the D-pad. Use A to confirm, B to cancel and X to open submenus.
* Button icons appear on the screen indicating that certain actions can be performed.
To switch between HUD components, including the log window, minimap, and service list, press the View button. Press the Menu button to open the main menu.
* When using a controller, controller icons will appear on the screen, indicating that certain actions can be performed.
Movement
| Commando | Standard button |
|---|---|
| Fluid character | Left stick |
| Move camera | Right stick |
| Change camera | Right thumb click* |
| Go through goals | D-pad left/right |
| Browse party members | D-pad op/ned |
| To confirm | A button |
| Cancel | B-knop |
| Draw and sheath/dismount weapons | LB+RB |
| Draw weapon and sheath/lock | left thumb click* |
| Map/subcommand | X-knop |
| Hoppe | Y button |
| Run automatically | LB+linker joystick |
| Browse Hotbars | RB+D pad button/action button |
| Enable Cross Hotbar action | LT/RT+D-pad button/action button |
| Edit cross hotbar | LT/RT+View-knop |
| Cycle through enemies (from near to far) | LT/RT+RB |
| Cycle through enemies (from farthest to nearest) | LT/RT+LB |
| Scroll up through the enmity list | LB+D pad enabled |
| Scroll through the enmity list | LB+D pad down |
| Scroll through the alliance list (forward) | LB+D Pad Right |
| Go through the alliance list (back) | LB+D-pad links |
*Left thumb click and right thumb click can assign different functions. To change the default settings, go to the button configuration menu under Gamepad Settings in the System Configuration menu.
Menu navigation
| Commando | Standard button |
|---|---|
| Move the cursor | D-pad |
| To confirm | A button |
| Cancel | B-knop |
| Subcommand | X-knop |
| Switch between UI (Back)/Increase Value tab | POND |
| Switch between UI (forward)/lower value tab | RB |
| Cycle HUD components | Show button |
| Main menu | Menu button |
Virtual must
| Commando | Standard button |
|---|---|
| Enable/disable the virtual mouse | LB+right thumb click |
| Move the cursor | Right stick |
| Left button of the virtual mouse | LT |
| Virtual mouse right button | RT |
Other things
| Commando | Standard button |
|---|---|
| Change the UI display mode | LB+Tone button |
| Take a screenshot | LB+menu button |
| Change the window size | Right thumb click* |
* Can only be executed if the window is active.
Movement while riding a flying mountain or diving
| Commando | Standard button |
|---|---|
| Climb | Y button |
| Ned | B-knop |
| Land *Only available while flying. * While you are grounded: dismount | LB+RB |
| To dive *Only available while swimming. | B-knop |
* You can ride a flying mount after making a certain amount of progress in the game.
* You can dive after making certain progress in the game.
Controller settingsNYTopical
Character movementNYTopical
Character movement
Move your character with the left stick. Hold B and then use the left stick to make your character walk.
Character movement
Move your character with the left stick. Press and hold 〇 and then use the left stick to move your character.
Character movement
Move your character with the left stick. Press and hold 〇 and then use the left stick to move your character.
Character movement
Move your character with the left stick. Hold B and then use the left stick to make your character walk.
Run automatically
By pressing LB while using the left stick, you can set your character to run automatically. This can be canceled by pressing LB again.
Run automatically
By pressing L1 while using the left stick, you can set your character to run automatically. This can be canceled by pressing L1 again.
Run automatically
By pressing LB while using the left stick, you can set your character to run automatically. This can be canceled by pressing LB again.
Hoppe
Press Y to jump. This can be used to jump over obstacles such as small rocks or low fences.
Hoppe
Press △ to jump. This can be used to jump over obstacles such as small rocks or low fences.
Hoppe
Press Y to jump. This can be used to jump over obstacles such as small rocks or low fences.
camera controlNYTopical
Use the right stick to control the camera. By pressing and holding LB you can zoom the camera in and out.
Use the right stick to control the camera. By pressing and holding L1 you can zoom the camera in and out.
Use the right stick to control the camera. By pressing and holding LB you can zoom the camera in and out.
* The camera rotation direction can be changed in the Drawing Configuration menu.
Touchpad controlsNYTopical
In the PS5™ version, the touchpad can be used as a virtual mouse.
* Pressing the touchpad activates the touchpad button function.
In the PS4™ version, the touchpad can be used as a virtual mouse.
* Pressing the touchpad activates the touchpad button function.
| Drag | Move the virtual mouse cursor |
|---|---|
| Press | Left button virtual mouse Click |
| Double tap + hold | Virtual mouse left button Hold |
| Tap with two fingers | Virtual mouse left button Hold (lock) |
Draw and dress your weaponNYTopical
By pressing LB+RB you can draw or sheathe your weapon into battle.
By pressing L1+R1 you can draw or sheathe your weapon into battle.
By pressing LB+RB you can draw or sheathe your weapon into battle.
* This action can also be performed by pressing L3 when no target is selected.
* If you are riding on a mountain, you can use this to get off.
* When riding a flying horse, this allows you to perform the "descent" function.
* This action can also be performed by pressing L3 when no target is selected.
* If you are riding on a mountain, you can use this to get off.
* When riding a flying horse, this allows you to perform the "descent" function.
* This action can also be performed by pressing the left stick when no target is selected.
* If you are riding on a mountain, you can use this to get off.
* When riding a flying horse, this allows you to perform the "descent" function.
Target selectionNYTopical
To aim a character or object, first look at your target and press A. When an aiming circle appears, press A again to perform an action depending on the target selected.
Player character:Open the command submenu
NPC:Start a conversation
Enemy:Enable auto-attack
Object:Interaction with the object
To target a character or object, first look at your target and press X. When a targeting circle appears, press X again to perform an action depending on the target selected.
To target a character or object, first look at your target and press X. When a targeting circle appears, press X again to perform an action depending on the target selected.
To aim a character or object, first look at your target and press A. When an aiming circle appears, press A again to perform an action depending on the target selected.
Player character:Open the command submenu
NPC:Start a conversation
Enemy:Enable auto-attack
Object:Interaction with the object
Target circle and selected targetNYTopical
Pressing the directional buttons displays the target circle, which allows you to select temporary targets.
Directional buttons left and right:Go through all the objectives
Up and down direction buttons:Browse the party's membership list
LB+↑/↓ :Go through the enmity list
LB+→/← :Browse the alliance list
After you select a target with the target circle, press A to change the target circle to a marker to confirm your target is selected.
Pressing the directional buttons displays the target circle, which allows you to select temporary targets.
Directional buttons left and right:Go through all the objectives
Up and down direction buttons:Browse the party's membership list
L1+↑/↓ :Go through the enmity list
L1+→/← :Browse the alliance list
After you select a target with the target circle, pressing
Pressing the directional buttons displays the target circle, which allows you to select temporary targets.
Directional buttons left and right:Go through all the objectives
Up and down direction buttons:Browse the party's membership list
L1+↑/↓ :Go through the enmity list
L1+→/← :Browse the alliance list
After you select a target with the target circle, pressing
Pressing the D-pad displays the target circle, which allows you to select temporary targets.
D-pad left/right:Go through all the objectives
D-pad op/ned:Browse the party's membership list
LB+D-pad op/ned:Go through the enmity list
LB+D kiss left/right:Browse the alliance list
After you select a target with the target circle, press A to change the target circle to a marker to confirm your target is selected.
* The target circle can still be used after confirming a selected target.
Measuring bicyclesNYTopical
By default, target cycling uses the following target settings:
By default, target cycling uses the following target settings:
Weapons clad:Go through all the objectives
Weapon drawn:Cycle through enemies and NPCs/objects
Target filter settings can be adjusted as desired.
Also select 'Enable customization'. allows further customization using LB and the four action buttons.
Target filter settings can be adjusted as desired.
Also select 'Enable customization'. allowing further adjustments using L1 and the four action buttons.
Target filter settings can be adjusted as desired.
Also select 'Enable customization'. allows further customization using LB and the four action buttons.
* To access the target filter settings, go to the Filters tab under Control Settings in the Character Configuration menu.
Menu navigationNYTopical
When using gamepad controls, players can navigate menus using the directional buttons. Use A to confirm, B to cancel and X to open submenus.
Press BACK to switch between HUD components, including the log window, minimap, and service list. Press START to select the main menu.
* When using a gamepad, gamepad icons will appear on the screen, indicating that certain actions can be performed.
Movement
| Commando | Standard button |
|---|---|
| Fluid character | Left stick |
| Move camera | Right stick |
| Change camera | Right thumb click* |
| Go through goals | Directional buttons left and right |
| Browse party members | Up and down direction buttons |
| To confirm | IN |
| Cancel | B |
| Draw and sheath/dismount weapons | LB+RB |
| Draw weapon and sheath/lock | L3* |
| Map/subcommand | X |
| Hoppe | Y |
| Run automatically | LB+linker joystick |
| Browse Hotbars | RB+Direction Button/Action Button |
| Enable Cross Hotbar action | LT/RT+directional button/action button |
| Edit cross hotbar | LT/RT+BACK |
| Cycle through enemies (from near to far) | LT/RT+RB |
| Cycle through enemies (from farthest to nearest) | LT/RT+LB |
| Scroll up through the enmity list | LB+↑ |
| Scroll through the enmity list | LB+↓ |
| Scroll through the alliance list (forward) | LB+ → |
| Go through the alliance list (back) | LB+← |
*Left thumb click and right thumb click can assign different functions. To change the default settings, go to the button configuration menu under Gamepad Settings in the System Configuration menu.
Menu navigation
| Commando | Standard button |
|---|---|
| Move the cursor | Directional button |
| To confirm | IN |
| Cancel | B |
| Subcommand | X |
| Switch between UI (Back)/Increase Value tab | POND |
| Switch between UI (forward)/lower value tab | RB |
| Cycle HUD components | RUG |
| Main menu | BEGIN |
Virtual must
This allows players to use the gamepad as if it were a mouse.
| Commando | Standard button |
|---|---|
| Enable/disable the virtual mouse | LB+right thumb click |
| Move the cursor | Right stick |
| Left button of the virtual mouse | LT |
| Virtual mouse right button | RT |
Other things
| Commando | Standard button |
|---|---|
| Change the UI display mode | LB+ BACK |
| Take a screenshot | LB+START |
| Change the window size | Right thumb click* |
* Can only be executed if the window is active.
Movement while riding a flying mountain or diving
| Commando | Standard button |
|---|---|
| Climb | Y |
| Ned | B |
| Land *Only available while flying. * While you are grounded: dismount | LB+RB |
| To dive *Only available while swimming. | B |
* You can ride a flying mount after making a certain amount of progress in the game.
* You can dive after making certain progress in the game.
When using the controller, players can navigate menus using the directional buttons. Use X to confirm, 〇 to cancel and □ to enter submenus.
* Button icons appear on the screen indicating that certain actions can be performed.
To switch between HUD components, including the log window, minimap, and service list, press the touchpad button. Press the OPTIONS button to open the main menu.
* When using a controller, controller icons will appear on the screen, indicating that certain actions can be performed.
When using the controller, players can navigate menus using the directional buttons. Use X to confirm, 〇 to cancel and □ to enter submenus.
* Button icons appear on the screen indicating that certain actions can be performed.
To switch between HUD components, including the log window, minimap, and service list, press the touchpad button. Press the OPTIONS button to open the main menu.
* When using a controller, controller icons will appear on the screen, indicating that certain actions can be performed.
Movement
| Commando | Standard button |
|---|---|
| Fluid character | Left stick |
| Move camera | Right stick |
| Change camera | R3* |
| Go through goals | Directional buttons left and right |
| Browse party members | Up and down direction buttons |
| To confirm | X |
| To confirm | X |
| Cancel | 〇 |
| Cancel | 〇 |
| Draw and sheath/dismount weapons | L1+R1 |
| Draw weapon and sheath/lock | L3* |
| Map/subcommand | □ |
| Hoppe | △ |
| Run automatically | L1+linker joystick |
| Browse Hotbars | R1+Direction Button/Action Button |
| Enable Cross Hotbar action | L2/R2+Direction Button/Action Button |
| Edit cross hotbar | L2/R2+Touchpad-knop |
| Cycle through enemies (from near to far) | L2/R2+R1 |
| Cycle through enemies (from farthest to nearest) | L2/R2+L1 |
| Scroll up through the enmity list | L1+↑ |
| Scroll through the enmity list | L1+↓ |
| Scroll through the alliance list (forward) | L1+→ |
| Go through the alliance list (back) | L1+← |
* Different functions can be assigned to L3 and R3. To change the default settings, open the Button Configuration menu under Controller Settings in the System Configuration menu.
Menu navigation
| Commando | Standard button |
|---|---|
| Move the cursor | Directional button |
| To confirm | X |
| To confirm | X |
| Cancel | 〇 |
| Cancel | 〇 |
| Subcommand | □ |
| Switch between UI (Back)/Increase Value tab | L1 |
| Switch between UI (forward)/lower value tab | R1 |
| Cycle HUD components | Touchpad button |
| Main menu | OPTIONS-knop |
Other things
| Commando | Standard button |
|---|---|
| Change the UI display mode | L1+Touchpad button |
| Change the window size | R3* |
* Can only be executed if the window is active.
Movement while riding a flying mountain or diving
| Commando | Standard button |
|---|---|
| Climb | △ |
| Ned | 〇 |
| Ned | 〇 |
| Land *Only available while flying. * While you are grounded: dismount | L1+R1 |
| To dive *Only available while swimming. | 〇 |
| To dive *Only available while swimming. | 〇 |
* You can ride a flying mount after making a certain amount of progress in the game.
* You can dive after making certain progress in the game.
When using the controller, players can navigate menus using the D-pad. Use A to confirm, B to cancel and X to open submenus.
* Button icons appear on the screen indicating that certain actions can be performed.
To switch between HUD components, including the log window, minimap, and service list, press the View button. Press the Menu button to open the main menu.
* When using a controller, controller icons will appear on the screen, indicating that certain actions can be performed.
Movement
| Commando | Standard button |
|---|---|
| Fluid character | Left stick |
| Move camera | Right stick |
| Change camera | Right thumb click* |
| Go through goals | D-pad left/right |
| Browse party members | D-pad op/ned |
| To confirm | A button |
| Cancel | B-knop |
| Draw and sheath/dismount weapons | LB+RB |
| Draw weapon and sheath/lock | left thumb click* |
| Map/subcommand | X-knop |
| Hoppe | Y button |
| Run automatically | LB+linker joystick |
| Browse Hotbars | RB+D pad button/action button |
| Enable Cross Hotbar action | LT/RT+D-pad button/action button |
| Edit cross hotbar | LT/RT+View-knop |
| Cycle through enemies (from near to far) | LT/RT+RB |
| Cycle through enemies (from farthest to nearest) | LT/RT+LB |
| Scroll up through the enmity list | LB+D pad enabled |
| Scroll through the enmity list | LB+D pad down |
| Scroll through the alliance list (forward) | LB+D Pad Right |
| Go through the alliance list (back) | LB+D-pad links |
*Left thumb click and right thumb click can assign different functions. To change the default settings, go to the button configuration menu under Gamepad Settings in the System Configuration menu.
Menu navigation
| Commando | Standard button |
|---|---|
| Move the cursor | D-pad |
| To confirm | A button |
| Cancel | B-knop |
| Subcommand | X-knop |
| Switch between UI (Back)/Increase Value tab | POND |
| Switch between UI (forward)/lower value tab | RB |
| Cycle HUD components | Show button |
| Main menu | Menu button |
Virtual must
| Commando | Standard button |
|---|---|
| Enable/disable the virtual mouse | LB+right thumb click |
| Move the cursor | Right stick |
| Left button of the virtual mouse | LT |
| Virtual mouse right button | RT |
Other things
| Commando | Standard button |
|---|---|
| Change the UI display mode | LB+Tone button |
| Take a screenshot | LB+menu button |
| Change the window size | Right thumb click* |
* Can only be executed if the window is active.
Movement while riding a flying mountain or diving
| Commando | Standard button |
|---|---|
| Climb | Y button |
| Ned | B-knop |
| Land *Only available while flying. * While you are grounded: dismount | LB+RB |
| To dive *Only available while swimming. | B-knop |
* You can ride a flying mount after making a certain amount of progress in the game.
* You can dive after making certain progress in the game.
Mouse and keyboard controlsNYTopical
Character movementNYTopical
You can move your character with a keyboard or a mouse. When using a keyboard, press the WASD keys to move. When using a mouse, press the left and right mouse buttons at the same time to move forward. To change direction while moving, hold down both buttons and drag the mouse left or right.
Run automatically
By clicking on the mouse wheel you can set your character to run automatically. If you hold down the right mouse button while dragging the mouse, the direction changes. If you hold down the left mouse button while dragging the mouse, the camera moves.
Hoppe
To jump, press the space bar on the keyboard. This can be used to jump over obstacles such as small rocks or low fences.
For details on other keys assigned to character gestures, seeMouse-controlInKeyboard controlssections.
* When using the WASD keys to move your character, you can choose the Standard type for character-based movements or the Legacy type for camera-based movements.
You can move your character with a keyboard or a mouse. When using a keyboard, press the WASD keys to move. When using a mouse, press the left and right mouse buttons at the same time to move forward. To change direction while moving, hold down both buttons and drag the mouse left or right.
Run automatically
By clicking on the mouse wheel you can set your character to run automatically. If you hold down the right mouse button while dragging the mouse, the direction changes. If you hold down the left mouse button while dragging the mouse, the camera moves.
Hoppe
To jump, press the space bar on the keyboard. This can be used to jump over obstacles such as small rocks or low fences.
For details on other keys assigned to character gestures, seeMouse-controlInKeyboard controlssections.
* When using the WASD keys to move your character, you can choose the Standard type for character-based movements or the Legacy type for camera-based movements.
You can move your character with a keyboard or a mouse. When using a keyboard, press the WASD keys to move. When using a mouse, press the left and right mouse buttons at the same time to move forward. To change direction while moving, hold down both buttons and drag the mouse left or right.
Run automatically
By clicking on the mouse wheel you can set your character to run automatically. If you hold down the right mouse button while dragging the mouse, the direction changes. If you hold down the left mouse button while dragging the mouse, the camera moves.
Hoppe
To jump, press the space bar on the keyboard. This can be used to jump over obstacles such as small rocks or low fences.
For details on other keys assigned to character gestures, seeMouse-controlInKeyboard controlssections.
* When using the WASD keys to move your character, you can choose the Standard type for character-based movements or the Legacy type for camera-based movements.
camera controlNYTopical
To control the camera, drag the mouse while pressing the left or right button.
Left button:
Only the camera view rotates and not your character.
Right button:
Your character looks in the direction you turn the camera.
* The camera rotation direction can be changed in the Drawing Configuration menu.
Target selectionNYTopical
You can target a character or an object such as a port or airspace by hovering the mouse pointer over the intended target and clicking the left mouse button.
With a right click you can perform one of several actions depending on the selected target.
Player character:Select as target (right click to open subcommand menu)
NPC:Start a conversation
Enemy:Enable auto-attack
Object:Interaction with the object
Mouse-controlNYTopical
Mouse-control
| Commando | Standard button |
|---|---|
| Click: Select target Drag: rotate camera | Left button |
| Click: Take action based on purpose Enemy = Auto attack NPC = Talk Second player = Open the Commands submenu | Right button |
| Move the character forward | Left + Right button |
| Zoom in/out with camera Zoom in/out on the map (if shown) | Roll the mouse wheel |
| Enable/disable Autorun | Mouse wheel button |
* The camera rotation direction can be changed in the Drawing Configuration menu.
Menu navigation
| Commando | Standard button |
|---|---|
| Select/confirm See submenu Drag area map (if shown) | Left button |
| Zoom in/out map (if shown) | Roll the mouse wheel |
| Map link (if shown) | Ctrl+right click control+right click |
Keyboard controlsNYTopical
Below is a list of default key bindings. To change keybindings, press NUM- or click System on the main menu, then select Keybinding and select the appropriate category at the top of the menu.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* If you're using a gamepad, live chat is enabled by default, which automatically logs keystrokes to the log window.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* If you're using a gamepad, live chat is enabled by default, which automatically logs keystrokes to the log window.
* On operating systems, the command key can function as a control key.
* Operating system commands for shift, control, option and all function keys take precedence over in-game systems. As such, these commands cannot be used for key bindings.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* In controller mode, live chat is enabled by default, which automatically logs keystrokes to the log window.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
* When using a keyboard with PS5™, the print screen and pause keys cannot be remapped as they are assigned to different system functions.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* In controller mode, live chat is enabled by default, which automatically logs keystrokes to the log window.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
* When using a keyboard with PS4™, the print screen and pause keys cannot be reassigned as they are assigned to different system functions.
* When using the WASD keys to move your character, you can choose Standard Type for a character-based view or Legacy Type for a camera-based view.
* In controller mode, live chat is enabled by default, which automatically logs keystrokes to the log window.
Instant chat must be disabled to use keyboard commands.
This setting can be changed on the General tab of the Character Configuration menu.
Movement
| Commando | Default key |
|---|---|
| Continue | W |
| Go back | S |
| turn left | IN |
| go right | D |
| Penalty kick over | Q |
| Punishment Right | E |
| Draw and sheath/dismount weapons | Z |
| Alternate between running/walking | NUM/ |
| Enable/disable Autorun | R |
| Hoppe | The space bar |
Camera
| Commando | Default key |
|---|---|
| Peg camera up | ↑ |
| Point the camera downwards | ↓ |
| Point the camera to the right | → |
| Place the camera on the left side | ← |
| Zoomcamera in | Side up |
| Zoom out camera | Edge down |
| Change camera | At home |
| Return the camera to the saved position | End |
| Save the current camera position | Ctrl+End control+exit |
| Return the camera to its default position | Ctrl+Shift+End controle+shift+exit |
| Turn the camera around | V |
| Lock the camera on the target | NUM5 |
| VIP camera on | Ctrl+↑ control+↑ |
| Tilt the camera down | Ctrl+↓ control+↓ |
| Face camera | Pause F15 |
Targeting
| Commando | Default key |
|---|---|
| Cycle through enemies (from near to far) | Tab |
| Cycle through enemies (from farthest to nearest) | Shift+Tab Shift+Tab |
| Facial measurements | F |
| Measure yourself | F1 |
| Target party list members | F2 - F8 |
| Target animal/known | F9 |
| Target the target of your current goal | T |
| Focus on the enemy attacking you | Shift+T shift＋T |
| Direction Focus Direction | F10 |
| Focus on the nearest enemy | F11 |
| Focus on the nearest NPC or object | F12 |
| Set/remove focus target | Shift+F shift+F |
| Scroll up through the enmity list | Ctrl+NUM8 controle+NUM8 |
| Scroll through the enmity list | Ctrl+NUM2 control+NUM2 |
| Scroll through the alliance list (forward) | Ctrl+NUM6 controle+NUM6 |
| Go through the alliance list (back) | Ctrl+NUM4 control+NUM4 |
To chat
| Commando | Default key |
|---|---|
| Klar chat-prompt | Enter enter |
| Clear text command | / |
| Temporarily change chat mode to reply (scroll forward) | Alt+R option＋R |
| Temporarily change chat mode to reply (go back) | Alt+Shift+R option+shift+R |
| Temporarily change chat mode to say | Alt+S option+S |
| Temporarily change chat mode to shout | Alt+H option+H |
| Temporarily change the chat mode to party | Alt+P option+P |
| Temporarily change chat mode to shout | Alt+Y option+Y |
| Answer (Repeat to cycle through PCs) | Alt+R option+R |
| Temporarily change the chat mode to free company | Alt+F option+F |
| Temporarily change chat mode to PvP team | Alt+T option+T |
| Temporarily change chat mode to Cross-world Linkshell (cycle forward) | Alt+C option+X |
| Temporarily change chat mode to Cross-world Linkshell (switch back) | Alt+Shift+C option＋shift＋C |
| Temporarily change chat mode to Linkshell (scroll forward) | Alt+L option+L |
| Temporarily switch chat mode to Linkshell (switch back) | Alt+Shift+L option+shift+L |
| Temporarily change the chat mode to Alliance | Alt+A option+C |
| Temporarily change the chat mode to a beginner network | Alt+N options＋N |
Other things
| Commando | Default key |
|---|---|
| To confirm | NUM0 |
| Cancel | NUM. |
| See submenu | NUM* |
| Move the cursor up/Hide up through the group list | NUM8 |
| Move the cursor down/scroll down the Party List | NUM2 |
| Move the cursor/target marker to the left | NUM4 |
| Move cursor/target marker to the right | NUMBER 6 |
| Toggle through HUD components | NUMBER 1 |
| Select the main menu | NUM+ |
| Draw/sheath weapon * While mounted: dismount | Z |
| Character | C |
| means of payment | Ctrl+C control+C |
| Free company | : |
| Linkshells | L |
| Inventory | I |
| Weapon chest | Ctrl+I control+B |
| Open Chocobo zadeltas | Shift+Ctrl+I shift＋control＋I |
| Card | M |
| Sign | Shift+M shift+M |
| Road signs | Ctrl+M controle+M |
| Actions and properties | P |
| Social | O |
| Duty seeker | U |
| Be afraid | Ctrl+U control+me |
| log | J |
| Character configuration | K |
| System configuration | Ctrl+K control+U |
| Target filter | X * |
| Preparation of logbook | N |
| Collection log | B |
| Hunting logbook | H |
| Fish log | Y |
| Fishing guide | Ctrl+Y control+Y |
| Orchestra list | Ctrl+O control＋O |
| Emotion list | (No default assignment) |
| System | NUM - |
| Switch between UI component tabs (forward/back) | NUM9/NUM7 |
| Change the UI display mode | Scroll Lock F14 |
| Take a screenshot | print Screen F13 |
| Change the window size | Ctrl+Home control+Home |
| Close the UI component/open the system menu | Esc Escape |
* When tapped, the target filter will make players, NPCs, enemies, or objects untargetable depending on your settings. Although it is disabled by default, it can be enabled by checking the 'Enable target switching' checkbox on the Filters tab under Control Options in the Drawing Configuration menu.
Movement while riding a flying mountain or diving
| Commando | Default key |
|---|---|
| Continue | W |
| Go back | S |
| turn left | IN |
| go right | D |
| Penalty kick over | Q |
| Punishment Right | E |
| Climb * While on the ground: jump | The space bar |
| Ned * While on the ground: jump | Ctrl+spacebar control+spacebar |
| Land *Only available while flying. * While you are grounded: dismount | Z |
| To dive *Only available while swimming. | Ctrl+spacebar control+spacebar |
* You can ride a flying mount after making a certain amount of progress in the game.
* You can dive after making certain progress in the game.
Remote playNYTopical
Remote controlNYTopical
PS4™ users can also enjoy adventures in Eorzea remotely using the PlayStation®Vita. For more information about Remote Play, see the PlayStation®Vita User Guide.
Below is a list of Remote Play button assignments on the PlayStation®Vita.
| DUALSHOCK®4 | PlayStation®Vita |
|---|---|
| Directional buttons | Directional buttons |
| Handlingsknapper (△, ○, X, □) | Handlingsknapper (△, ○, X, □) |
| L1 / R1 | L/R |
| L2/R2 | Rear touchpad (top left and top right) |
| L3/R3 | Rear touchpad (left and bottom right) |
| Left and right sticks | Left and right sticks |
| OPTIONS-knop | Start button |
| SHARE button | SELECT-handsome |
| PS-knop | Touchscreen menu (press PS button to display) |
| Touchpad | Touch screen |
| Touchpad button | Touch screen (hold card) |
* The touchpad button cannot be used when using the mouse functionality with the touch screen.
To use the touchpad button, uncheck "Use touchpad as mouse." under Monitoring Settings in the System Configuration menu.
PlayStation remote controlNYTopical
PS5™ users can also enjoy adventures in Eorzea remotely using a smartphone or tablet.
Learn more aboutremote game.
Xbox Remote-playNYTopical
Xbox Series X|S users can also enjoy adventures in Eorzea remotely using a smartphone or tablet.
Learn more aboutXbox Remote-play.
Remote playback settingsNYTopical
The control settings can be adjusted for remote playback.
In addition, it is possible to create a separate control chart specifically for Remote Play using the PlayStation®Vita.
Remote Play Standaardkontrolindstillinger
| Standard button | Commando |
|---|---|
| Directional buttons | Directional buttons |
| △ | Hoppe |
| X | Select Goal/Confirm |
| 〇 | Cancel |
| □ | Map/subcommand |
| Start button | Main menu |
| SELECT-handsome | SHARE button |
| Touch screen (touchpad) | Move the mouse pointer |
| Briefly hold the touch screen (touchpad button) | Cycle HUD components (forward)* |
| L | Select Hotbar on the left cross |
| R | Select Right Cross Hotbar |
| L2 | Run automatically |
| R2 | Select Hotbar Set |
| L3 | Draw/sheath/lock weapon |
| R3 | Change camera |
| Left stick | Fluid character |
| Right stick | Move camera |
* The touchpad button cannot be used when using the mouse functionality with the touch screen.
To use the touchpad button, uncheck "Use touchpad as mouse." under Monitoring Settings in the System Configuration menu.
Adjustment of the controlsNYTopical
The following settings can be configured separately for remote playback.
| Institution | Menu |
|---|---|
| Knap configuration | System configuration → Controllerindstillinger → Knapconfig |
| HUD layout and size | Main menu → System → HUD layout |
| Window positions and size | * Window positions are saved automatically. |
| Log window font size | Character Configuration → Log Window Settings → General |
| Transparency of the log window | Character Configuration → Log Window Settings → General |
| Mouse as touchpad controller | System Configuration → Controller Indstillinger |
| Improved touchpad controls | System Configuration → Controller Indstillinger |
* The touchpad button cannot be used when using the mouse functionality with the touch screen.
To use the touchpad button, uncheck "Use touchpad as mouse." under Monitoring Settings in the System Configuration menu.
